AGCO-ALLIS 5680 vs SAME Explorer 80 II (DT)

7 material differences · fewer than 12

Tractor one

1991–1997

No measured PTO figure

Tractor two

1989–1998

No measured PTO figure

Which should you choose?

Read our verdict on the 5680 and the Explorer 80 II (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

7 material differences · 9 fields identical or within 5%, which is not counted as material

AGCO-ALLIS 5680 and SAME Explorer 80 II (DT), field by field
Field	5680	Explorer 80 II (DT)	Gap
Engine
Engine power, claimed claimed	78.9 hp	78.9 hp	—
Engine declared	S.L.H. 1000.4 A-1	SAME 1000.4 A 1	differs
Displacement declared	4.00 L	4.00 L	—
Maximum torque declared	193 lb·ft · 261 N·m	204 lb·ft · 276 N·m	+6% Explorer 80 II (DT)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Pedal-operated dry SAME double clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Hydraulic control declared	—	Load sensing	—
Pump flow declared	10.7 gpm · 40.5 L/min	10.7 gpm · 40.5 L/min	—
Pressure declared	3,046 psi · 210 bar	1,740 psi · 120 bar	+75% 5680
Three-point lift at ends declared	6,790 lb · 3,080 kg	—	—
Rear PTO speeds declared	540/1000 rpm	540/540E/1000E/1000 rpm	differs
Weight & dimensions
Unladen weight declared	6,669 lb · 3,025 kg	6,724 lb · 3,050 kg	—
Maximum permissible mass declared	11,464 lb · 5,200 kg	—	—
Wheelbase declared	92.9 in · 2,360 mm	95.1 in · 2,415 mm	—
Length declared	154.3 in · 3,919 mm	144.5 in · 3,670 mm	+7% 5680
Width declared	76.4 in · 1,941 mm	81.1 in · 2,060 mm	+6% Explorer 80 II (DT)
Height declared	99.6 in · 2,530 mm	102.2 in · 2,595 mm	—
Ground clearance declared	19.7 in · 500 mm	20.5 in · 520 mm	—
Turning radius, braked declared	9.2 ft · 2.80 m	9.6 ft · 2.94 m	—
Fuel tank declared	83.5 qt · 79.0 L	116.2 qt · 110.0 L	+39% Explorer 80 II (DT)

Source

Source