AGCO-ALLIS 5670 vs UTB U-703 DT

10 material differences · fewer than 12

Tractor one

1991–1999

No measured PTO figure

Tractor two

1988–2004

No measured PTO figure

Which should you choose?

Read our verdict on the 5670 and the U-703 DT → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 7 fields identical or within 5%, which is not counted as material

AGCO-ALLIS 5670 and UTB U-703 DT, field by field
Field	5670	U-703 DT	Gap
Engine
Engine power, claimed claimed	69.1 hp	69.1 hp	—
Engine declared	S.L.H. 1000.4 A	UTB D-2404.000	differs
Displacement declared	4.00 L	3.76 L	+6% 5670
Maximum torque declared	176 lb·ft · 239 N·m	175 lb·ft · 237 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	Pedal-operated dry SAME double clutch	Dry U.T.B. double clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	9.5 gpm · 36.0 L/min	11.2 gpm · 42.5 L/min	+18% U-703 DT
Pressure declared	1,740 psi · 120 bar	2,031 psi · 140 bar	+17% U-703 DT
Three-point lift at ends declared	6,504 lb · 2,950 kg	7,575 lb · 3,436 kg	+16% U-703 DT
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	6,195 lb · 2,810 kg	7,198 lb · 3,265 kg	+16% U-703 DT
Maximum permissible mass declared	9,700 lb · 4,400 kg	—	—
Wheelbase declared	91.3 in · 2,319 mm	87.2 in · 2,215 mm	—
Length declared	151.6 in · 3,851 mm	148.4 in · 3,770 mm	—
Width declared	73.2 in · 1,859 mm	76.3 in · 1,939 mm	—
Height declared	96.5 in · 2,451 mm	98.4 in · 2,500 mm	—
Ground clearance declared	17.7 in · 450 mm	9.7 in · 246 mm	+83% 5670
Turning radius, braked declared	9.2 ft · 2.80 m	—	—
Fuel tank declared	71.9 qt · 68.0 L	65.5 qt · 62.0 L	+10% 5670

Source

Source