AGCO-ALLIS 5670 vs John Deere 2300 (A)

10 material differences · fewer than 12

Tractor one

1991–1999

No measured PTO figure

Tractor two

1993–1996

No measured PTO figure

Which should you choose?

Read our verdict on the 5670 and the 2300 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 7 fields identical or within 5%, which is not counted as material

AGCO-ALLIS 5670 and John Deere 2300 (A), field by field
Field	5670	2300 (A)	Gap
Engine
Engine power, claimed claimed	69.1 hp	69.1 hp	—
Engine declared	S.L.H. 1000.4 A	ZETOR 7701	differs
Displacement declared	4.00 L	3.92 L	—
Maximum torque declared	176 lb·ft · 239 N·m	182 lb·ft · 247 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	Pedal-operated dry SAME double clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	9.5 gpm · 36.0 L/min	10.6 gpm · 40.2 L/min	+12% 2300 (A)
Pressure declared	1,740 psi · 120 bar	1,160 psi · 80 bar	+50% 5670
Three-point lift at ends declared	6,504 lb · 2,950 kg	8,885 lb · 4,030 kg	+37% 2300 (A)
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	6,195 lb · 2,810 kg	7,187 lb · 3,260 kg	+16% 2300 (A)
Maximum permissible mass declared	9,700 lb · 4,400 kg	12,346 lb · 5,600 kg	+27% 2300 (A)
Wheelbase declared	91.3 in · 2,319 mm	88.8 in · 2,256 mm	—
Length declared	151.6 in · 3,851 mm	148.6 in · 3,775 mm	—
Width declared	73.2 in · 1,859 mm	73.8 in · 1,875 mm	—
Height declared	96.5 in · 2,451 mm	104.9 in · 2,665 mm	+9% 2300 (A)
Ground clearance declared	17.7 in · 450 mm	16.1 in · 410 mm	+10% 5670
Turning radius, braked declared	9.2 ft · 2.80 m	—	—
Fuel tank declared	71.9 qt · 68.0 L	100.4 qt · 95.0 L	+40% 2300 (A)

Source

Source