AGCO-ALLIS 5670 vs Fiat 70-56 LM (DT

14 material differences

Tractor one

1991–1999

No measured PTO figure

Tractor two

from 1988

No measured PTO figure

Which should you choose?

Read our verdict on the 5670 and the 70-56 LM (DT → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

14 material differences · 4 fields identical or within 5%, which is not counted as material

AGCO-ALLIS 5670 and Fiat 70-56 LM (DT, field by field
Field	5670	70-56 LM (DT	Gap
Engine
Engine power, claimed claimed	69.1 hp	69.1 hp	—
Engine declared	S.L.H. 1000.4 A	Fiat 8045.06.206 or 307	differs
Displacement declared	4.00 L	3.61 L	+11% 5670
Maximum torque declared	176 lb·ft · 239 N·m	164 lb·ft · 222 N·m	+8% 5670
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	Pedal-operated dry SAME double clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	Open centre	—
Pump flow declared	9.5 gpm · 36.0 L/min	8.7 gpm · 32.8 L/min	+10% 5670
Pressure declared	1,740 psi · 120 bar	3,046 psi · 210 bar	+75% 70-56 LM (DT
Three-point lift at ends declared	6,504 lb · 2,950 kg	5,600 lb · 2,540 kg	+16% 5670
Rear PTO speeds declared	540/1000 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	6,195 lb · 2,810 kg	5,357 lb · 2,430 kg	+16% 5670
Maximum permissible mass declared	9,700 lb · 4,400 kg	—	—
Wheelbase declared	91.3 in · 2,319 mm	86.7 in · 2,203 mm	+5% 5670
Length declared	151.6 in · 3,851 mm	143.3 in · 3,640 mm	+6% 5670
Width declared	73.2 in · 1,859 mm	71.7 in · 1,820 mm	—
Height declared	96.5 in · 2,451 mm	95.3 in · 2,420 mm	—
Ground clearance declared	17.7 in · 450 mm	19.7 in · 500 mm	+11% 70-56 LM (DT
Turning radius, braked declared	9.2 ft · 2.80 m	10.7 ft · 3.26 m	+16% 70-56 LM (DT
Fuel tank declared	71.9 qt · 68.0 L	63.4 qt · 60.0 L	+13% 5670

Source

Source