13 material differences

Tractor oneAGCO-ALLIS 56701991–1999No measured PTO figureTractor twoDeutz-Fahr AgroCompakt 3.70 V/F1992–1996No measured PTO figure

Which should you choose?

Read our verdict on the 5670 and the AgroCompakt 3.70 V/F → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

13 material differences · 2 fields identical or within 5%, which is not counted as material

AGCO-ALLIS 5670 and Deutz-Fahr AgroCompakt 3.70 V/F, field by field
Field5670AgroCompakt 3.70 V/FGap
Engine
Engine power, claimed claimed69.1 hp69.1 hp—
Engine declaredS.L.H. 1000.4 AKHD F4L 912differs
Displacement declared4.00 L3.77 L+6% 5670
Maximum torque declared176 lb·ft · 239 N·m179 lb·ft · 243 N·m—
Transmission
Top speed declared18.6–24.9 mph · 30–40 km/h21.7–24.9 mph · 35–40 km/hdiffers
Clutch declaredPedal-operated dry SAME double clutch——
Hydraulics & hitch
Hydraulic centre declaredOpen centre——
Pump flow declared9.5 gpm · 36.0 L/min10.8 gpm · 41.0 L/min+14% AgroCompakt 3.70 V/F
Pressure declared1,740 psi · 120 bar——
Three-point lift, at the coupling points declared6,504 lb · 2,950 kg4,850 lb · 2,200 kg+34% 5670
Rear PTO speeds declared540/1000 rpm540 rpm / 1000 rpmdiffers
Weight & dimensions
Unladen weight declared6,195 lb · 2,810 kg4,960–5,401 lb · 2,250–2,450 kgdiffers
Maximum permissible mass declared9,700 lb · 4,400 kg8,818 lb · 4,000 kg+10% 5670
Wheelbase declared91.3 in · 2,319 mm80.5 in · 2,045 mm+13% 5670
Length declared151.6 in · 3,851 mm136.6 in · 3,470 mm+11% 5670
Width declared73.2–93.5 in · 1,859–2,375 mm43.3–47.2 in · 1,100–1,200 mmdiffers
Ground clearance declared17.7 in · 450 mm10.2–13.0 in · 260–330 mmdiffers
Turning radius, braked declared9.2 ft · 2.80 m——
Fuel tank declared71.9 qt · 68.0 L58.1 qt · 55 L+24% 5670

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

AGCO-ALLIS 5670 sources

Source
  • Source: Traktorenlexikon, “AGCO-Allis 5670”

Deutz-Fahr AgroCompakt 3.70 V/F sources

Source
  • Source: Traktorenlexikon, “Deutz-Fahr AgroCompact 3.70”
  • Source: Traktorenlexikon, “Deutz D 6006”