9 material differences · fewer than 12

Tractor oneAGCO-ALLIS 56601994–1999No measured PTO figureTractor twoDEUTZ-ALLIS 62601986–1990No measured PTO figure

Which should you choose?

Read our verdict on the 5660 and the 6260 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 6 fields identical or within 5%, which is not counted as material

AGCO-ALLIS 5660 and DEUTZ-ALLIS 6260, field by field
Field	5660	6260	Gap
Engine
Engine power, claimed claimed	57.3 hp	57.3 hp	—
Engine declared	S.L.H. 1000.3 AT	KHD F3L 913	differs
Displacement declared	3.00 L	3.06 L	—
Maximum torque declared	137 lb·ft · 186 N·m	144 lb·ft · 195 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	Dry SAME double clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	9.5 gpm · 36.0 L/min	12.5 gpm · 47.5 L/min	+32% 6260
Pressure declared	1,305 psi · 90 bar	—	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	4,993 lb · 2,265 kg	6,460 lb · 2,930 kg	+29% 6260
Maximum permissible mass declared	—	11,023 lb · 5,000 kg	—
Wheelbase declared	82.9 in · 2,106 mm	79.2 in · 2,012 mm	—
Length declared	141.3 in · 3,589 mm	143.3 in · 3,640 mm	—
Width declared	72.6–88.4 in · 1,844–2,245 mm	84.2 in · 2,139 mm	differs
Height, over the safety frame declared	88.5 in · 2,248 mm	97.6 in · 2,480 mm	+10% 6260
Ground clearance declared	19.7 in · 500 mm	18.0 in · 457 mm	+9% 5660
Turning radius, braked declared	9.5 ft · 2.90 m	11.8 ft · 3.60 m	+24% 6260
Fuel tank declared	60.2 qt · 57.0 L	79.3 qt · 75.0 L	+32% 6260

Source

Source