AGCO-ALLIS 5660 vs Case-IH CS-58 (A)

8 material differences · fewer than 12

Tractor one

1994–1999

No measured PTO figure

Tractor two

1996–2001

No measured PTO figure

Which should you choose?

Read our verdict on the 5660 and the CS-58 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 8 fields identical or within 5%, which is not counted as material

AGCO-ALLIS 5660 and Case-IH CS-58 (A), field by field
Field	5660	CS-58 (A)	Gap
Engine
Engine power, claimed claimed	57.3 hp	57.3 hp	—
Engine declared	S.L.H. 1000.3 AT	PERKINS 903-27 T	differs
Displacement declared	3.00 L	2.70 L	+11% 5660
Maximum torque declared	137 lb·ft · 186 N·m	155 lb·ft · 210 N·m	+13% CS-58 (A)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Dry SAME double clutch	Dry Carraro double clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	9.5 gpm · 36.0 L/min	8.1 gpm · 30.8 L/min	+17% 5660
Pressure declared	1,305 psi · 90 bar	3,481 psi · 240 bar	+167% CS-58 (A)
Three-point lift at ends declared	—	4,894 lb · 2,220 kg	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	4,993 lb · 2,265 kg	5,203 lb · 2,360 kg	—
Maximum permissible mass declared	—	9,259 lb · 4,200 kg	—
Wheelbase declared	82.9 in · 2,106 mm	83.3 in · 2,117 mm	—
Length declared	141.3 in · 3,589 mm	139.0 in · 3,530 mm	—
Width declared	72.6 in · 1,844 mm	74.4 in · 1,890 mm	—
Height declared	88.5 in · 2,248 mm	87.8 in · 2,230 mm	—
Ground clearance declared	19.7 in · 500 mm	16.1 in · 410 mm	+22% 5660
Turning radius, braked declared	9.5 ft · 2.90 m	—	—
Fuel tank declared	60.2 qt · 57.0 L	77.1 qt · 73.0 L	+28% CS-58 (A)

Source

Source