AGCO-ALLIS 5650 vs AGRIFULL 80-50 (DT)
14 material differences
Which should you choose?
Read our verdict on the 5650 and the 80-50 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
14 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | 5650 | 80-50 (DT) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 47.3 hp | 47.3 hp | — |
| Engine declared | S.L.H. 1000.3 A | FIAT 8035.00 | differs |
| Displacement declared | 3.00 L | 2.34 L | +28% 5650 |
| Maximum torque declared | 123 lb·ft · 167 N·m | 110 lb·ft · 149 N·m | +12% 5650 |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 15.5 mph · 25 km/h | +20% 5650 |
| Clutch declared | Dry SAME double clutch | dry VALEO or LuK double clutch type 11/11 inches | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | — | — |
| Pump flow declared | 8.7 gpm · 33.0 L/min | 5.8 gpm · 22.0 L/min | +50% 5650 |
| Pressure declared | 1,305 psi · 90 bar | 3,118 psi · 215 bar | +139% 80-50 (DT) |
| Three-point lift at ends declared | — | 2,978 lb · 1,351 kg | — |
| Rear PTO speeds declared | 540/1000 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 4,530 lb · 2,055 kg | 3,946 lb · 1,790 kg | +15% 5650 |
| Wheelbase declared | 77.8 in · 1,976 mm | 77.6 in · 1,970 mm | — |
| Length declared | 133.0 in · 3,378 mm | 141.7 in · 3,600 mm | +7% 80-50 (DT) |
| Width declared | 66.7 in · 1,694 mm | 63.0 in · 1,600 mm | +6% 5650 |
| Height declared | 87.9 in · 2,233 mm | 49.8 in · 1,265 mm | +77% 5650 |
| Ground clearance declared | 19.7 in · 500 mm | 15.0 in · 380 mm | +32% 5650 |
| Turning radius, braked declared | 8.9 ft · 2.70 m | — | — |
| Fuel tank declared | 60.2 qt · 57.0 L | 52.8 qt · 50.0 L | +14% 5650 |
AGCO-ALLIS 5650 sources
Source
- Source: Traktorenlexikon, “AGCO-Allis 5650”
AGRIFULL 80-50 (DT) sources
Source
- Source: Traktorenlexikon, “Agrifull 80-50”