AGCO-ALLIS 4660 vs Fiat 60-86 F (F/DT)

12 material differences

Tractor one

1991–1997

No measured PTO figure

Tractor two

1992–2000

No measured PTO figure

Which should you choose?

Read our verdict on the 4660 and the 60-86 F (F/DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 3 fields identical or within 5%, which is not counted as material

AGCO-ALLIS 4660 and Fiat 60-86 F (F/DT), field by field
Field	4660	60-86 F (F/DT)	Gap
Engine
Engine power, claimed claimed	59.1 hp	59.1 hp	—
Engine declared	SAME 1.053 P	FIAT-IVECO 8035.05.208 (309)	differs
Displacement declared	3.12 L	2.93 L	+6% 4660
Maximum torque declared	144 lb·ft · 195 N·m	—	—
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6 mph · 30 km/h	—
Clutch declared	Dry double clutch	—	—
Hydraulics & hitch
Pump flow declared	8.5 gpm · 32.0 L/min	10.6 gpm · 40.0 L/min	+25% 60-86 F (F/DT)
Pressure declared	1,740 psi · 120 bar	3,118 psi · 215 bar	+79% 60-86 F (F/DT)
Three-point lift at ends declared	4,630 lb · 2,100 kg	5,236 lb · 2,375 kg	+13% 60-86 F (F/DT)
Rear PTO speeds declared	540 rpm	540 rpm	—
Weight & dimensions
Unladen weight declared	4,762 lb · 2,160 kg	4,204 lb · 1,907 kg	+13% 4660
Wheelbase declared	82.1 in · 2,085 mm	72.6 in · 1,844 mm	+13% 4660
Length declared	143.7 in · 3,650 mm	128.9 in · 3,275 mm	+11% 4660
Width declared	69.3 in · 1,760 mm	60.6 in · 1,540 mm	+14% 4660
Height declared	92.5 in · 2,350 mm	78.4 in · 1,991 mm	+18% 4660
Ground clearance declared	18.1 in · 460 mm	14.6 in · 372 mm	+24% 4660
Turning radius, braked declared	11.6 ft · 3.55 m	—	—
Fuel tank declared	58.1 qt · 55.0 L	47.6 qt · 45.0 L	+22% 4660

Source

Source