7 material differences · fewer than 12

Tractor oneAebi TT 241from 2016No measured PTO figureTractor twoMassey Ferguson MF 5425 (A)2003–2011No measured PTO figure

Which should you choose?

We will not advise between these two machines, because their unladen weight differs by more than 25% (41%); the drive differs (4WD; Two-wheel or four-wheel drive); they were not built in overlapping years (2016–2016; 2003–2011). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.

Field by field

7 material differences · 2 fields identical or within 5%, which is not counted as material

Aebi TT 241 and Massey Ferguson MF 5425 (A), field by field
FieldTT 241MF 5425 (A)Gap
Engine
Engine power, claimed claimed74 hp74.0 hp—
Engine declared—Perkins 1104 C-44—
Displacement declared—4.40 L—
Maximum torque declared229 lb·ft · 310 N·m217 lb·ft · 294 N·m+5% TT 241
Transmission
Top speed declared—24.9 mph · 40 km/h—
Clutch declaredElectro-hydraulic single-disc clutchpedal or electrohydraulically operated wet Valeo multi-disc clutchdiffers
Hydraulics & hitch
Hydraulic centre declared—Open centre—
Pump flow declared10.6 gpm · 40 L/min——
Pressure declared2,901 psi · 200 bar2,176 psi · 150 bar+33% TT 241
Rear PTO speeds declared540 rpm / 750 rpm / 1000 rpm540 rpm / 1000 rpmdiffers
Weight & dimensions
Unladen weight declared6,173 lb · 2,800 kg8,697 lb · 3,945 kg+41% MF 5425 (A)
Maximum permissible mass declared9,921 lb · 4,500 kg16,667 lb · 7,560 kg+68% MF 5425 (A)
Wheelbase declared—97.0 in · 2,464 mm—
Length declared161.0 in · 4,090 mm165.7 in · 4,210 mm—
Width declared83.1 in · 2,110 mm79.3–100.4 in · 2,014–2,550 mmdiffers
Ground clearance declared—18.3 in · 464 mm—

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Aebi TT 241 sources

Source
  • Source: Traktorenlexikon, “Aebi TT 241”

Massey Ferguson MF 5425 (A) sources

Source
  • Source: Traktorenlexikon, “Massey Ferguson MF 5425”