4 material differences · fewer than 12
Tractor oneAebi TT 241from 2016No measured PTO figureTractor twoJohn Deere 5403 (A)2007–2008No measured PTO figure
Which should you choose?
We will not advise between these two machines, because their unladen weight differs by more than 25% (31%); the drive differs (4WD; Two-wheel or four-wheel drive); they were not built in overlapping years (2016–2016; 2007–2008). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
4 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | TT 241 | 5403 (A) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 74 hp | 73.1 hp | — |
| Engine declared | — | John Deere 3.029 TPY | — |
| Displacement declared | — | 2.90 L | — |
| Maximum torque declared | 229 lb·ft · 310 N·m | — | — |
| Transmission | |||
| Top speed declared | — | 18.6 mph · 30 km/h | — |
| Clutch declared | Electro-hydraulic single-disc clutch | — | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | — | Open centre | — |
| Pump flow declared | 10.6 gpm · 40 L/min | 10.8 gpm · 41.0 L/min | — |
| Pressure declared | 2,901 psi · 200 bar | — | — |
| Rear PTO speeds declared | 540 rpm / 750 rpm / 1000 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 6,173 lb · 2,800 kg | 4,725 lb · 2,143 kg | +31% TT 241 |
| Maximum permissible mass declared | 9,921 lb · 4,500 kg | — | — |
| Wheelbase declared | — | 80.3 in · 2,040 mm | — |
| Length declared | 161.0 in · 4,090 mm | 138.4 in · 3,515 mm | +16% TT 241 |
| Width declared | 83.1 in · 2,110 mm | 73.4–89.6 in · 1,865–2,275 mm | differs |
| Ground clearance declared | — | 15.0 in · 380 mm | — |
| Fuel tank declared | — | 76.0 qt · 71.9 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Aebi TT 241 sources
- Source: Traktorenlexikon, “Aebi TT 241”
John Deere 5403 (A) sources
- Source: Traktorenlexikon, “John Deere 5403”