Which tractor is best for farming
Every band below is computed from our own records, and no machine is named a winner.
Every article that answers this question with a single model is guessing. It does not know your ground, your implements, or how many hours a year the machine will work, and those three decide the answer between them.
What we can do is show you what each power band actually contains. The figures below come from 3,232 tractors with sourced specifications — not from a shortlist somebody was paid to write.
What does “best” actually depend on?
Three things, in this order.
The heaviest thing you pull. A tractor is sized by its worst job, not its average one. A four-furrow plough in heavy clay asks more than the same farm’s mowing and carting will ever ask.
The hours. A machine working 200 hours a year and one working 900 are different purchases even at identical power. Hours decide whether a cab, a suspended front axle and a powershift are comfort or necessity.
The ground. Weight buys traction and costs soil structure. This is the constraint people discover last and regret longest, and it is why the heaviest band below is a soil decision before it is a power one.
Acreage is a shorthand for all three, and a rough one. We use it below because it is how the question gets asked, not because it is the real variable.
From our database
Computed from core.farm_power_band(), our own published rule, across 3,232 machines
with a sourced power figure. Queried 1 October 2026. The boundaries are ours — 60, 120 and 200
horsepower — chosen because they are the numbers a farmer recognises, not fitted to our data.
Under 60 hp — 1,454 machines. Median unladen weight 2,050 kg. Of those, 799 publish a three-point lift figure, median 1,760 kg. The best-documented machines we hold in this band are International Harvester 323, Deutz-Fahr Agroplus 60 and SAME Frutteto 60 II (DT). Smallholdings, livestock yards, orchards, municipal work. Browse them in compact tractors.
60 to 120 hp — 1,162 machines, the broadest band we hold. Median weight 3,876 kg, median lift 3,800 kg across the 840 that publish one. This is the mixed-farm band and the one most readers are actually shopping in. See utility tractors.
120 to 200 hp — 439 machines. Median weight 6,604 kg, median lift 6,567 kg across the 301 that publish one. Arable work at scale, where the implement rather than the tractor sets the pace. See standard-size tractors.
200 hp and over — 177 machines. Median weight 10,727 kg — roughly five times the median of the smallest band. Median lift 8,905 kg from the 105 that publish one. Large arable and contracting. See high-power tractors.
How much of each band those medians rest on. Weight is published for every machine in all four bands, so those medians describe the band completely. Lift is not: it is published by 799 of the smallest band, 840 of the 60 to 120 hp band, 301 of the next and 105 of the largest. A median drawn from a little over half a band is still worth having, and it is worth knowing that is what it is before you lean on it.
Two things that spread tells you. The weight climbs faster than the power does, which is the soil point made in numbers. And the number of machines falls away sharply above 120 hp — most tractors ever built were not big ones, and most farms were not big farms.
What suits under 100 acres?
The smallest band, in most cases. 1,454 of our machines sit under 60 hp, and at a median 2,050 kg they go on wet ground in spring without leaving a record of it.
The failure mode here is buying power you cannot use. A 90 hp tractor on twenty acres spends its life at part load, which is the least efficient way an engine runs and the most expensive way to own one.
What matters more than power at this size: lift capacity, because loader work dominates; and whether the machine has four-wheel drive, because traction rather than power is what limits a light tractor.
What suits 100 to 500 acres?
The 60 to 120 hp band, which holds 1,162 of our records — more than any other. It is broad because the farms are varied, and because manufacturers know it is where the volume is.
At a median 3,876 kg these machines are heavy enough to pull properly and light enough to travel. The median three-point lift, 3,800 kg, is the figure to check against your heaviest mounted implement before anything else.
What suits 500 acres and up?
Above 500 acres the question stops being about the tractor and starts being about the implement behind it. 439 machines sit in the 120 to 200 hp band and 177 above it, and the spread in weight is what should decide between them rather than the headline power.
A 10,727 kg machine does work a lighter one cannot. It also travels over ground that will remember it, and the cost of that shows up two seasons later in a yield map rather than on an invoice.
What should you check on any of them?
Four things, none of which appear in a brochure headline.
Which power figure you are reading. A claimed engine figure and a measured figure at the shaft are different quantities. Where we hold both, the shaft reads 11.4% below the claim on average, and on the worst machines a quarter below. The PTO horsepower list holds every tractor we have a laboratory figure for.
Lift capacity against your heaviest implement, not against the tractor you are replacing.
Hydraulic flow, which decides how fast a loader or a tipping trailer actually works and is routinely ignored until the machine is on the yard.
Unladen weight against your ground, in spring, in the field you worry about.
The warning that applies to every band above
Every power figure in this article is a manufacturer’s claim unless a laboratory has measured it. We publish both where we hold both, and label which is which, because they are not the same number and a table that mixes them is telling you about its own sourcing rather than about the tractors.
Our data methodology sets out how every figure here is sourced, and how we decide what publishes and what does not.
Common questions
- What size tractor do I need for 100 acres?
- Most work on that scale sits in the 60 to 120 hp band, which is the broadest band in our records at 1,162 machines. The deciding factor is the heaviest implement you intend to pull, not the acreage on its own — a 100-acre farm running a four-furrow plough asks more of a tractor than a 300-acre farm that only mows and carts.
- Is a bigger tractor always better?
- No. Above 200 hp the median machine in our records weighs 10,727 kg unladen. Weight buys traction and it costs soil structure, and a tractor that is too heavy for the ground is a problem you cannot fix with horsepower.
- Can I compare two tractors on horsepower alone?
- Only where both figures are the same kind of number. A manufacturer's claimed engine figure and a laboratory measurement at the power take-off are different quantities, and across the machines where we hold both the shaft reads 11.4% below the claim.
Sources
- Traktorenlexikon, the model articles cited on each tractor's page — Wikibooks, CC BY-SA 4.0. Retrieved . Original
- OECD standard codes for the official testing of agricultural tractors — OECD. Figures from these test reports are cited per machine on each model page, from the report records in our database; we hold no fetched copy of the OECD programme's web pages.