Steyr 9160 a or VALMET 8550 HiTech?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the 9160 a has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 8550 HiTech has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The VALMET 8550 HiTech suits loader and hydraulic implement work better on this data: 130% (3,900 kg / 8,598 lb) more three-point lift.
- The Steyr 9160 a suits road haulage better on this data: 29% (2,500 kg / 5,512 lb) more maximum permissible mass.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | 9160 a | 8550 HiTech | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 117.8 kW (158.0 hp)Traktorenlexikon, “Steyr 9160” | 117.7 kW (157.8 hp)Traktorenlexikon, “Valmet Mega-8550 HiTech” | Not comparableNot comparable on power at the PTO shaft: the 9160 a has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 8550 HiTech has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the 9160 a and the 8550 HiTech. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the 9160 a and the 8550 HiTech. |
| Which pumps more oil for implements? | — | 73.6 L/min (19.4 gpm)Traktorenlexikon, “Valmet Mega-8550 HiTech” | No figureNo call on hydraulic flow: no figure on record for the 9160 a. |
| Which lifts more on the three-point hitch? | 3,000 kg (6,614 lb)Traktorenlexikon, “Steyr 9160” | 6,900 kg (15,212 lb)Traktorenlexikon, “Valmet Mega-8550 HiTech” | AheadThe VALMET 8550 HiTech has 130% more lift (3,900 kg / 8,598 lb) than the Steyr 9160 a (both lift at the hitch ends, as stated by the source). |
| Which is heavier, for traction? | 6,050 kg (13,338 lb)Traktorenlexikon, “Steyr 9160” | 5,100 kg (11,244 lb)Traktorenlexikon, “Valmet Mega-8550 HiTech” | Ahead (a fact, not an advantage)The Steyr 9160 a is 19% heavier (950 kg / 2,094 lb) than the VALMET 8550 HiTech (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | 11,000 kg (24,251 lb)Traktorenlexikon, “Steyr 9160” | 8,500 kg (18,739 lb)Traktorenlexikon, “Valmet Mega-8550 HiTech” | AheadThe Steyr 9160 a has 29% higher maximum permissible mass (2,500 kg / 5,512 lb) than the VALMET 8550 HiTech (both maximum permissible mass, as stated by the source). |
| Which has the wider choice of gears? | 32Traktorenlexikon, “Steyr 9160” | 36Traktorenlexikon, “Valmet Mega-8550 HiTech” | EvenEven on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the 9160 a and the 8550 HiTech. |
| Which is faster on the road? | 40 km/h (24.9 mph)Traktorenlexikon, “Steyr 9160” | 40 km/h (24.9 mph) to 50 km/h (31.1 mph)Traktorenlexikon, “Valmet Mega-8550 HiTech” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 540/1000 rpmTraktorenlexikon, “Steyr 9160” | 540/1000 rpmTraktorenlexikon, “Valmet Mega-8550 HiTech” | EvenEven on PTO speeds: the same speeds (540, 1000 rpm). |
| Which PTO runs independently of the ground drive? | — | independentTraktorenlexikon, “Valmet Mega-8550 HiTech” | No figureNo call on PTO independence: not stated for the 9160 a. |
| Which drives on both axles? | 4WDTraktorenlexikon, “Steyr 9160” | 4WDTraktorenlexikon, “Valmet Mega-8550 HiTech” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1995–1997 | 1998–2003 | EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The VALMET 8550 HiTech has 130% more lift (3,900 kg / 8,598 lb) than the Steyr 9160 a (both lift at the hitch ends, as stated by the source).
- The Steyr 9160 a is 19% heavier (950 kg / 2,094 lb) than the VALMET 8550 HiTech (both unladen weight, as stated by the source).
- The Steyr 9160 a has 29% higher maximum permissible mass (2,500 kg / 5,512 lb) than the VALMET 8550 HiTech (both maximum permissible mass, as stated by the source).
- Even on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on PTO speeds: the same speeds (540, 1000 rpm).
- Even on drive: every machine is available with four-wheel drive.
- Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
- Not comparable on power at the PTO shaft: the 9160 a has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 8550 HiTech has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources