SOMECA 650 (TD) or UTB U-650/651 M?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the 650 (TD) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the U-650/651 M has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The UTB U-650/651 M suits loader and hydraulic implement work better on this data: 39% (11.2 L/min / 3.0 gpm) more hydraulic flow.
  • The UTB U-650/651 M suits road haulage better on this data: 13% (3.0 km/h / 1.9 mph) more top speed.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for SOMECA 650 (TD) and UTB U-650/651 M, with the call on each
Question650 (TD)U-650/651 MCall
Which puts more power through the PTO shaft?47.8 kW (64.1 hp)Traktorenlexikon, “Someca 650”47.8 kW (64.1 hp)Traktorenlexikon, “UTB U 650/651 M”Not comparableNot comparable on power at the PTO shaft: the 650 (TD) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the U-650/651 M has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the 650 (TD) and the U-650/651 M.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the 650 (TD) and the U-650/651 M.
Which pumps more oil for implements?28.8 L/min (7.6 gpm)Traktorenlexikon, “Someca 650”40.0 L/min (10.6 gpm)Traktorenlexikon, “UTB U 650/651 M”AheadThe UTB U-650/651 M has 39% more hydraulic flow (11.2 L/min / 3.0 gpm) than the SOMECA 650 (TD) (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?2,080 kg (4,586 lb)Traktorenlexikon, “Someca 650”No figureNo call on three-point lift: no figure on record for the U-650/651 M.
Which is heavier, for traction?2,875 kg (6,338 lb)Traktorenlexikon, “Someca 650”3,380 kg (7,452 lb)Traktorenlexikon, “UTB U 650/651 M”Ahead (a fact, not an advantage)The UTB U-650/651 M is 18% heavier (505 kg / 1,113 lb) than the SOMECA 650 (TD) (both unladen weight, as stated by the source).
Which may carry more ballast and load?No figureNo call on maximum permissible mass: no figure on record for the 650 (TD) and the U-650/651 M.
Which has the wider choice of gears?7 to 14Traktorenlexikon, “Someca 650”10Traktorenlexikon, “UTB U 650/651 M”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the 650 (TD) and the U-650/651 M.
Which is faster on the road?24 km/h (14.9 mph)Traktorenlexikon, “Someca 650”27 km/h (16.8 mph)Traktorenlexikon, “UTB U 650/651 M”AheadThe UTB U-650/651 M has 13% more top speed (3.0 km/h / 1.9 mph) than the SOMECA 650 (TD) (both top speed forward, as stated by the source).
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Someca 650”540 rpmTraktorenlexikon, “UTB U 650/651 M”AheadThe SOMECA 650 (TD) offers 1000 rpm at the PTO, which the UTB U-650/651 M does not (as stated by the sources).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Someca 650”No figureNo call on PTO independence: not stated for the U-650/651 M.
Which drives on both axles?Two-wheel or four-wheel driveTraktorenlexikon, “Someca 650”Two-wheel or four-wheel driveTraktorenlexikon, “UTB U 650/651 M”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1971–19761973–1990EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The UTB U-650/651 M has 39% more hydraulic flow (11.2 L/min / 3.0 gpm) than the SOMECA 650 (TD) (both pump flow, as stated by the source).
  • The UTB U-650/651 M is 18% heavier (505 kg / 1,113 lb) than the SOMECA 650 (TD) (both unladen weight, as stated by the source).
  • The UTB U-650/651 M has 13% more top speed (3.0 km/h / 1.9 mph) than the SOMECA 650 (TD) (both top speed forward, as stated by the source).
  • The SOMECA 650 (TD) offers 1000 rpm at the PTO, which the UTB U-650/651 M does not (as stated by the sources).
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on power at the PTO shaft: the 650 (TD) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the U-650/651 M has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources