Massey Ferguson 294 AS or Massey Ferguson MF 3055 (A)?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the 294 AS has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 3055 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Massey Ferguson 294 AS and Massey Ferguson MF 3055 (A), with the call on each
Question294 ASMF 3055 (A)Call
Which puts more power through the PTO shaft?55 kW (74 hp)Traktorenlexikon, “Massey Ferguson MF 294S”55 kW (74 hp)Traktorenlexikon, “Massey Ferguson MF 3055”Not comparableNot comparable on power at the PTO shaft: the 294 AS has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 3055 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the 294 AS and the MF 3055 (A).
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the 294 AS and the MF 3055 (A).
Which pumps more oil for implements?50.0 L/min (13.2 gpm)Traktorenlexikon, “Massey Ferguson MF 3055”No figureNo call on hydraulic flow: no figure on record for the 294 AS.
Which lifts more on the three-point hitch?2,700 kg (5,952 lb)Traktorenlexikon, “Massey Ferguson MF 294S”4,055 kg (8,940 lb)Traktorenlexikon, “Massey Ferguson MF 3055”Not comparableNot comparable on three-point lift: the 294 AS: lift at an unstated point, as stated by the source (Traktorenlexikon, “Massey Ferguson MF 294S”); the MF 3055 (A): lift at the hitch ends, as stated by the source (Traktorenlexikon, “Massey Ferguson MF 3055”) — not the same quantity, basis and condition.
Which is heavier, for traction?3,230 kg (7,121 lb)Traktorenlexikon, “Massey Ferguson MF 294S”3,900 kg (8,598 lb)Traktorenlexikon, “Massey Ferguson MF 3055”Ahead (a fact, not an advantage)The Massey Ferguson MF 3055 (A) is 21% heavier (670 kg / 1,477 lb) than the Massey Ferguson 294 AS (both unladen weight, as stated by the source).
Which may carry more ballast and load?5,000 kg (11,023 lb)Traktorenlexikon, “Massey Ferguson MF 294S”No figureNo call on maximum permissible mass: no figure on record for the MF 3055 (A).
Which has the wider choice of gears?16Traktorenlexikon, “Massey Ferguson MF 3055”No figureNo call on forward gears: no figure on record for the 294 AS.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the 294 AS and the MF 3055 (A).
Which is faster on the road?30 km/h (18.6 mph)Traktorenlexikon, “Massey Ferguson MF 294S”30 km/h (18.6 mph)Traktorenlexikon, “Massey Ferguson MF 3055”EvenEven on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Massey Ferguson MF 294S”540/1000 rpmTraktorenlexikon, “Massey Ferguson MF 3055”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Massey Ferguson MF 3055”No figureNo call on PTO independence: not stated for the 294 AS.
Which drives on both axles?Two-wheel or four-wheel driveTraktorenlexikon, “Massey Ferguson MF 294S”2WD / 4WDTraktorenlexikon, “Massey Ferguson MF 3055”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1980–19871993–1995Ahead (a fact, not an advantage)The Massey Ferguson MF 3055 (A) is newer: production began 13 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Massey Ferguson MF 3055 (A) is 21% heavier (670 kg / 1,477 lb) than the Massey Ferguson 294 AS (both unladen weight, as stated by the source).
  • The Massey Ferguson MF 3055 (A) is newer: production began 13 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on drive: every machine is available with four-wheel drive.
  • Not comparable on power at the PTO shaft: the 294 AS has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 3055 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • Not comparable on three-point lift: the 294 AS: lift at an unstated point, as stated by the source (Traktorenlexikon, “Massey Ferguson MF 294S”); the MF 3055 (A): lift at the hitch ends, as stated by the source (Traktorenlexikon, “Massey Ferguson MF 3055”) — not the same quantity, basis and condition.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, maximum permissible mass, forward gears, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources