Massey Ferguson MF 5430 A vs VALMET 6350 HiTech

12 material differences

Tractor one

2011–2013

No measured PTO figure

Tractor two

1999–2006

No measured PTO figure

Which should you choose?

Read our verdict on the MF 5430 A and the 6350 HiTech → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 3 fields identical or within 5%, which is not counted as material

Massey Ferguson MF 5430 A and VALMET 6350 HiTech, field by field
Field	MF 5430 A	6350 HiTech	Gap
Engine
Engine power, claimed claimed	88.8 hp	88.8 hp	—
Engine declared	Perkins 1104 D-44 TA	VALMET 420 DSRE or 44.311 DT	differs
Displacement declared	4.40 L	4.40 L	—
Maximum torque declared	280 lb·ft · 379 N·m	—	—
Transmission
Top speed declared	24.9 mph · 40 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Pedal or electro-hydraulically operated wet VALEO multi-plate driving clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	—	18.5 gpm · 70.0 L/min	—
Pressure declared	2,176 psi · 150 bar	2,901 psi · 200 bar	+33% 6350 HiTech
Three-point lift at ends declared	9,480 lb · 4,300 kg	12,346 lb · 5,600 kg	+30% 6350 HiTech
Rear PTO speeds declared	540 rpm / 1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	8,378 lb · 3,800 kg	10,516 lb · 4,770 kg	+26% 6350 HiTech
Maximum permissible mass declared	18,739 lb · 8,500 kg	19,842 lb · 9,000 kg	+6% 6350 HiTech
Wheelbase declared	97.0 in · 2,464 mm	91.6 in · 2,326 mm	+6% MF 5430 A
Length declared	166.2 in · 4,221 mm	180.5 in · 4,585 mm	+9% 6350 HiTech
Width declared	60.4–80.1 in · 1,533–2,034 mm	92.3 in · 2,345 mm	differs
Height declared	106.6 in · 2,707 mm	110.2 in · 2,800 mm	—
Ground clearance declared	15.0 in · 380 mm	17.1 in · 434 mm	+14% 6350 HiTech
Turning radius, braked declared	—	15.3 ft · 4.65 m	—
Fuel tank declared	137.4 qt · 130.0 L	174.4 qt · 165.0 L	+27% 6350 HiTech

Source

Source