Massey Ferguson MF 4235 (A) vs VALMET 6200-4

10 material differences · fewer than 12

Tractor one

1997–2001

No measured PTO figure

Tractor two

1996–2007

No measured PTO figure

Which should you choose?

Read our verdict on the MF 4235 (A) and the 6200-4 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 4 fields identical or within 5%, which is not counted as material

Massey Ferguson MF 4235 (A) and VALMET 6200-4, field by field
Field	MF 4235 (A)	6200-4	Gap
Engine
Engine power, claimed claimed	74.0 hp	74.0 hp	—
Engine declared	Perkins 4.41	VALMET 420 DSRE (44 DT)	differs
Displacement declared	4.08 L	4.40 L	+8% 6200-4
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Pedal operated, dry and air cooled single disc clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	—	21.2 gpm · 80.3 L/min	—
Three-point lift at ends declared	6,856 lb · 3,110 kg	9,601 lb · 4,355 kg	+40% 6200-4
Rear PTO speeds declared	540/1000 rpm	540 rpm / 1000 rpm	differs
Weight & dimensions
Unladen weight declared	7,915 lb · 3,590 kg	8,929–9,193 lb · 4,050–4,170 kg	differs
Maximum permissible mass declared	15,432 lb · 7,000 kg	14,330 lb · 6,500 kg	+8% MF 4235 (A)
Wheelbase declared	92.5 in · 2,350 mm	91.6 in · 2,327 mm	—
Length declared	157.9 in · 4,010 mm	177.7 in · 4,514 mm	+13% 6200-4
Width declared	78.3 in · 1,990 mm	85.9 in · 2,181 mm	+10% 6200-4
Height declared	103.7 in · 2,635 mm	106.3 in · 2,700 mm	—
Ground clearance declared	11.4 in · 290 mm	16.9 in · 430 mm	+48% 6200-4
Turning radius, braked declared	—	15.3 ft · 4.65 m	—
Fuel tank declared	196.5 qt · 186.0 L	167.0 qt · 158.0 L	+18% MF 4235 (A)

Source

Source