Landini 165 DT vs Steyr 9160 a

7 material differences · fewer than 12

Tractor one

1997–2001

No measured PTO figure

Tractor two

1995–1997

No measured PTO figure

Which should you choose?

Read our verdict on the 165 DT and the 9160 a → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

7 material differences · 9 fields identical or within 5%, which is not counted as material

Landini 165 DT and Steyr 9160 a, field by field
Field	165 DT	9160 a	Gap
Engine
Engine power, claimed claimed	157.8 hp	158.0 hp	—
Engine declared	Perkins 1006-6 THR 4	Steyr-VALMET WD 620 DS	differs
Displacement declared	5.99 L	6.60 L	+10% 9160 a
Maximum torque declared	426 lb·ft · 577 N·m	491 lb·ft · 666 N·m	+15% 9160 a
Transmission
Top speed declared	24.9 mph · 40 km/h	24.9 mph · 40 km/h	—
Clutch declared	Pedal-operated dry single-disc clutch designed as driving clutch	Pedal operated dry single-plate clutch as driving clutch	differs
Hydraulics & hitch
Pump flow declared	16.2 gpm · 61.5 L/min	—	—
Three-point lift at ends declared	18,519 lb · 8,400 kg	6,614 lb · 3,000 kg	+180% 165 DT
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	12,963 lb · 5,880 kg	13,338 lb · 6,050 kg	—
Maximum permissible mass declared	30,424 lb · 13,800 kg	24,251 lb · 11,000 kg	+25% 165 DT
Wheelbase declared	110.2 in · 2,800 mm	115.2 in · 2,925 mm	—
Length declared	188.2 in · 4,780 mm	203.3 in · 5,165 mm	+8% 9160 a
Width declared	97.6 in · 2,480 mm	96.5 in · 2,450 mm	—
Height declared	113.8 in · 2,890 mm	119.3 in · 3,030 mm	—
Ground clearance declared	20.5 in · 520 mm	19.7 in · 500 mm	—
Turning radius, braked declared	20.7 ft · 6.30 m	—	—
Fuel tank declared	274.7 qt · 260 L	285.3 qt · 270.0 L	—

Source

Source