Lamborghini 115 DT Formula or Massey Ferguson MF 3115 (A)?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the 115 DT Formula has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 3115 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The Lamborghini 115 DT Formula suits loader and hydraulic implement work better on this data: 22% (10.9 L/min / 2.9 gpm) more hydraulic flow.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | 115 DT Formula | MF 3115 (A) | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 84.6 kW (113.5 hp)Traktorenlexikon, “Lamborghini 115 DT A Formula” | 84.6 kW (113.5 hp)Traktorenlexikon, “Massey Ferguson MF 3115” | Not comparableNot comparable on power at the PTO shaft: the 115 DT Formula has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 3115 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the 115 DT Formula and the MF 3115 (A). |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the 115 DT Formula and the MF 3115 (A). |
| Which pumps more oil for implements? | 60.9 L/min (16.1 gpm)Traktorenlexikon, “Lamborghini 115 DT A Formula” | 50.0 L/min (13.2 gpm)Traktorenlexikon, “Massey Ferguson MF 3115” | AheadThe Lamborghini 115 DT Formula has 22% more hydraulic flow (10.9 L/min / 2.9 gpm) than the Massey Ferguson MF 3115 (A) (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 5,190 kg (11,442 lb)Traktorenlexikon, “Lamborghini 115 DT A Formula” | 5,540 kg (12,214 lb)Traktorenlexikon, “Massey Ferguson MF 3115” | EvenEven on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which is heavier, for traction? | 4,660 kg (10,274 lb)Traktorenlexikon, “Lamborghini 115 DT A Formula” | 4,530 kg (9,987 lb)Traktorenlexikon, “Massey Ferguson MF 3115” | EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which may carry more ballast and load? | 7,500 kg (16,535 lb)Traktorenlexikon, “Lamborghini 115 DT A Formula” | 8,000 kg (17,637 lb)Traktorenlexikon, “Massey Ferguson MF 3115” | EvenEven on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which has the wider choice of gears? | 24 to 36Traktorenlexikon, “Lamborghini 115 DT A Formula” | 16 to 32Traktorenlexikon, “Massey Ferguson MF 3115” | EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the 115 DT Formula and the MF 3115 (A). |
| Which is faster on the road? | 40 km/h (24.9 mph)Traktorenlexikon, “Lamborghini 115 DT A Formula” | 30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Massey Ferguson MF 3115” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 540 rpm / 1000 rpmTraktorenlexikon, “Lamborghini 115 DT A Formula” | 540/1000 rpmTraktorenlexikon, “Massey Ferguson MF 3115” | EvenEven on PTO speeds: the same speeds (540, 1000 rpm). |
| Which PTO runs independently of the ground drive? | — | independentTraktorenlexikon, “Massey Ferguson MF 3115” | No figureNo call on PTO independence: not stated for the 115 DT Formula. |
| Which drives on both axles? | 4WDTraktorenlexikon, “Lamborghini 115 DT A Formula” | 2WD / 4WDTraktorenlexikon, “Massey Ferguson MF 3115” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1991–1996 | 1990–1993 | EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Lamborghini 115 DT Formula has 22% more hydraulic flow (10.9 L/min / 2.9 gpm) than the Massey Ferguson MF 3115 (A) (both pump flow, as stated by the source).
- Even on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on PTO speeds: the same speeds (540, 1000 rpm).
- Even on drive: every machine is available with four-wheel drive.
- Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
- Not comparable on power at the PTO shaft: the 115 DT Formula has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 3115 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources