John Deere 6430 vs New Holland TM 125 (Traktorenlexikon)

14 material differences

Tractor one

2007–2012

No measured PTO figure

Tractor two

1999–2002

No measured PTO figure

Which should you choose?

Read our verdict on the 6430 and the TM 125 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

14 material differences · 2 fields identical or within 5%, which is not counted as material

John Deere 6430 and New Holland TM 125 (Traktorenlexikon), field by field
Field	6430	TM 125	Gap
Engine
Engine power, claimed claimed	113.5 hp	113.5 hp	—
Engine declared	John Deere PowrTech 4.045 HL/V2-CR	NEW HOLLAND 675-T/WS	differs
Displacement declared	4.53 L	7.48 L	+65% TM 125
Maximum torque declared	326 lb·ft · 442 N·m	372 lb·ft · 504 N·m	+14% TM 125
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	24.9 mph · 40 km/h	differs
Clutch declared	Pedal-actuated hydraulic wet Perma-Clutch II multi-disc clutch	—	—
Hydraulics & hitch
Hydraulic control declared	Load sensing	—	—
Pump flow declared	—	30.9 gpm · 116.9 L/min	—
Pressure declared	3,408 psi · 235 bar	2,466 psi · 170 bar	+38% 6430
Three-point lift at ends declared	11,199 lb · 5,080 kg	14,462 lb · 6,560 kg	+29% TM 125
Rear PTO speeds declared	540E/540/1000 rpm	540/540E/1000 rpm	differs
Weight & dimensions
Unladen weight declared	10,637 lb · 4,825 kg	11,766 lb · 5,337 kg	+11% TM 125
Maximum permissible mass declared	18,078 lb · 8,200 kg	18,739 lb · 8,500 kg	—
Wheelbase declared	94.5 in · 2,400 mm	107.2 in · 2,723 mm	+13% TM 125
Length declared	168.9 in · 4,289 mm	184.1 in · 4,675 mm	+9% TM 125
Width declared	91.2 in · 2,316 mm	84.6 in · 2,150 mm	+8% 6430
Height declared	108.0 in · 2,743 mm	115.2 in · 2,926 mm	+7% TM 125
Ground clearance declared	18.1 in · 460 mm	14.4 in · 365 mm	+26% 6430
Turning radius, braked declared	—	14.8 ft · 4.52 m	—
Fuel tank declared	174.4 qt · 165.0 L	343.4 qt · 325.0 L	+97% TM 125

Source

Source