Hürlimann XN-707 vs Lamborghini Agile 770 S (DT)

6 material differences · fewer than 12

Tractor one

1998–2003

No measured PTO figure

Tractor two

1996–2003

No measured PTO figure

Which should you choose?

Read our verdict on the XN-707 and the Agile 770 S (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

6 material differences · 12 fields identical or within 5%, which is not counted as material

Hürlimann XN-707 and Lamborghini Agile 770 S (DT), field by field
Field	XN-707	Agile 770 S (DT)	Gap
Engine
Engine power, claimed claimed	69.1 hp	69.1 hp	—
Engine declared	Hürlimann 1000.3 WT-1	SAME 1000.3 WT 1	differs
Displacement declared	3.00 L	3.00 L	—
Maximum torque declared	184 lb·ft · 250 N·m	184 lb·ft · 250 N·m	—
Transmission
Top speed declared	24.9 mph · 40 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Pedal-operated dry SDF single-disc clutch as driving clutch	Pedal-operated dry SAME-DEUTZ-FAHR single-disc clutch	differs
Hydraulics & hitch
Hydraulic control declared	Load sensing	Load sensing	—
Pump flow declared	6.6 gpm · 25.0 L/min	8.7 gpm · 33.0 L/min	+32% Agile 770 S (DT)
Pressure declared	3,046 psi · 210 bar	3,118 psi · 215 bar	—
Three-point lift at ends declared	—	5,732 lb · 2,600 kg	—
Rear PTO speeds declared	540 rpm / 1000 rpm	540 rpm / 1000 rpm	—
Weight & dimensions
Unladen weight declared	5,412 lb · 2,455 kg	4,894 lb · 2,220 kg	+11% XN-707
Wheelbase declared	75.8 in · 1,926 mm	75.8 in · 1,926 mm	—
Length declared	135.1 in · 3,431 mm	116.9 in · 2,970 mm	+16% XN-707
Width declared	50.8 in · 1,290 mm	50.8 in · 1,290 mm	—
Height declared	83.1 in · 2,110 mm	83.1 in · 2,110 mm	—
Ground clearance declared	9.1 in · 230 mm	9.1 in · 230 mm	—
Turning radius, braked declared	13.4 ft · 4.07 m	13.4 ft · 4.07 m	—
Fuel tank declared	61.3 qt · 58.0 L	61.3 qt · 58.0 L	—

Source

Source