Hürlimann XN-707 vs John Deere 2446 FA

9 material differences · fewer than 12

Tractor one

1998–2003

No measured PTO figure

Tractor two

1996–2003

No measured PTO figure

Which should you choose?

Read our verdict on the XN-707 and the 2446 FA → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 8 fields identical or within 5%, which is not counted as material

Hürlimann XN-707 and John Deere 2446 FA, field by field
Field	XN-707	2446 FA	Gap
Engine
Engine power, claimed claimed	69.1 hp	69.1 hp	—
Engine declared	Hürlimann 1000.3 WT-1	John Deere 3029 TFG-21	differs
Displacement declared	3.00 L	2.94 L	—
Maximum torque declared	184 lb·ft · 250 N·m	168 lb·ft · 228 N·m	+10% XN-707
Transmission
Top speed declared	24.9 mph · 40 km/h	24.9 mph · 40 km/h	—
Clutch declared	Pedal-operated dry SDF single-disc clutch as driving clutch	Pedal-operated dry LuK double clutch	differs
Hydraulics & hitch
Hydraulic control declared	Load sensing	Load sensing	—
Pump flow declared	6.6 gpm · 25.0 L/min	6.9 gpm · 26.0 L/min	—
Pressure declared	3,046 psi · 210 bar	2,176 psi · 150 bar	+40% XN-707
Three-point lift at ends declared	—	3,461 lb · 1,570 kg	—
Rear PTO speeds declared	540 rpm / 1000 rpm	540 rpm / 750 rpm / 1000 rpm	differs
Weight & dimensions
Unladen weight declared	5,412 lb · 2,455 kg	4,608 lb · 2,090 kg	+17% XN-707
Wheelbase declared	75.8 in · 1,926 mm	75.4 in · 1,915 mm	—
Length declared	135.1 in · 3,431 mm	128.6 in · 3,267 mm	—
Width declared	50.8 in · 1,290 mm	57.5 in · 1,460 mm	+13% 2446 FA
Height declared	83.1 in · 2,110 mm	85.0 in · 2,160 mm	—
Ground clearance declared	9.1 in · 230 mm	14.4 in · 365 mm	+59% 2446 FA
Turning radius, braked declared	13.4 ft · 4.07 m	—	—
Fuel tank declared	61.3 qt · 58.0 L	42.3 qt · 40.0 L	+45% XN-707

Source

Source