Hürlimann SX 1600 vs Landini 165 DT

6 material differences · fewer than 12

Tractor one

2000–2004

No measured PTO figure

Tractor two

1997–2001

No measured PTO figure

Which should you choose?

Read our verdict on the SX 1600 and the 165 DT → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

6 material differences · 8 fields identical or within 5%, which is not counted as material

Hürlimann SX 1600 and Landini 165 DT, field by field
Field	SX 1600	165 DT	Gap
Engine
Engine power, claimed claimed	157.8 hp	157.8 hp	—
Engine declared	SAME-DEUTZ-FAHR 1000.6 WTI-3V	Perkins 1006-6 THR 4	differs
Displacement declared	6.00 L	5.99 L	—
Maximum torque declared	494 lb·ft · 670 N·m	426 lb·ft · 577 N·m	+16% SX 1600
Transmission
Top speed declared	24.9 mph · 40 km/h	24.9 mph · 40 km/h	—
Clutch declared	—	Pedal-operated dry single-disc clutch designed as driving clutch	—
Hydraulics & hitch
Pump flow declared	—	16.2 gpm · 61.5 L/min	—
Pressure declared	2,176 psi · 150 bar	—	—
Three-point lift at ends declared	22,046 lb · 10,000 kg	18,519 lb · 8,400 kg	+19% SX 1600
Rear PTO speeds declared	540 rpm / 1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	14,991 lb · 6,800 kg	12,963 lb · 5,880 kg	+16% SX 1600
Maximum permissible mass declared	—	30,424 lb · 13,800 kg	—
Wheelbase declared	112.2 in · 2,850 mm	110.2 in · 2,800 mm	—
Length declared	191.4 in · 4,861 mm	188.2 in · 4,780 mm	—
Width declared	95.5 in · 2,426 mm	97.6 in · 2,480 mm	—
Height declared	116.9 in · 2,970 mm	113.8 in · 2,890 mm	—
Ground clearance declared	21.4 in · 544 mm	20.5 in · 520 mm	—
Turning radius, braked declared	—	20.7 ft · 6.30 m	—
Fuel tank declared	422.7 qt · 400.0 L	274.7 qt · 260 L	+54% SX 1600

Source

Source