Hürlimann H-4105 Elite vs John Deere 7200 (A)

15 material differences

Tractor one

1989–1995

No measured PTO figure

Tractor two

1993–1997

No measured PTO figure

Which should you choose?

Read our verdict on the H-4105 Elite and the 7200 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

15 material differences · 1 fields identical or within 5%, which is not counted as material

Hürlimann H-4105 Elite and John Deere 7200 (A), field by field
Field	H-4105 Elite	7200 (A)	Gap
Engine
Engine power, claimed claimed	101.6 hp	100.7 hp	—
Engine declared	SAME 1000.4 WTI	John Deere 6.059 TRW-01 or 6.068 TRW-01	differs
Displacement declared	4.00 L	—	—
Maximum torque declared	266 lb·ft · 360 N·m	311 lb·ft · 421 N·m	+17% 7200 (A)
Transmission
Top speed declared	24.9 mph · 40 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Pedal operated dry single-plate clutch	Pedal-operated, hydraulic wet John Deere multi-disc clutch	differs
Hydraulics & hitch
Hydraulic control declared	—	Load sensing	—
Pump flow declared	14.8 gpm · 56.0 L/min	26.2 gpm · 99.2 L/min	+77% 7200 (A)
Pressure declared	2,176 psi · 150 bar	2,538 psi · 175 bar	+17% 7200 (A)
Three-point lift at ends declared	10,494 lb · 4,760 kg	—	—
Rear PTO speeds declared	540/1000/540E/1000E rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	8,245 lb · 3,740 kg	12,679 lb · 5,751 kg	+54% 7200 (A)
Maximum permissible mass declared	12,015 lb · 5,450 kg	19,842 lb · 9,000 kg	+65% 7200 (A)
Wheelbase declared	91.3 in · 2,320 mm	112.2 in · 2,850 mm	+23% 7200 (A)
Length declared	160.6 in · 4,080 mm	174.6 in · 4,435 mm	+9% 7200 (A)
Width declared	82.7 in · 2,100 mm	96.0 in · 2,438 mm	+16% 7200 (A)
Height declared	103.1 in · 2,620 mm	113.4 in · 2,880 mm	+10% 7200 (A)
Ground clearance declared	19.3 in · 490 mm	14.2 in · 360 mm	+36% H-4105 Elite
Turning radius, braked declared	9.7 ft · 2.95 m	—	—
Fuel tank declared	106.2 qt · 100.5 L	215.6 qt · 204.0 L	+103% 7200 (A)

Source

Source