Hürlimann H-4105 Elite (Traktorenlexikon) or John Deere 7200 (A)?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the H-4105 Elite has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 7200 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The John Deere 7200 (A) suits loader and hydraulic implement work better on this data: 136% (57.2 L/min / 15.1 gpm) more hydraulic flow.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Hürlimann H-4105 Elite (Traktorenlexikon) and John Deere 7200 (A), with the call on each
QuestionH-4105 Elite7200 (A)Call
Which puts more power through the PTO shaft?75.7 kW (101.5 hp)Traktorenlexikon, “Hürlimann 4105 Elite”75.1 kW (100.7 hp)Traktorenlexikon, “John Deere 7200”Not comparableNot comparable on power at the PTO shaft: the H-4105 Elite has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 7200 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the H-4105 Elite and the 7200 (A).
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the H-4105 Elite and the 7200 (A).
Which pumps more oil for implements?42.0 L/min (11.1 gpm)Traktorenlexikon, “Hürlimann 4105 Elite”99.2 L/min (26.2 gpm)Traktorenlexikon, “John Deere 7200”AheadThe John Deere 7200 (A) has 136% more hydraulic flow (57.2 L/min / 15.1 gpm) than the Hürlimann H-4105 Elite (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?No figureNo call on three-point lift: no figure on record for the H-4105 Elite and the 7200 (A).
Which is heavier, for traction?3,920 kg (8,642 lb)Traktorenlexikon, “Hürlimann 4105 Elite”5,751 kg (12,679 lb)Traktorenlexikon, “John Deere 7200”Ahead (a fact, not an advantage)The John Deere 7200 (A) is 47% heavier (1,831 kg / 4,037 lb) than the Hürlimann H-4105 Elite (both unladen weight, as stated by the source).
Which may carry more ballast and load?9,000 kg (19,842 lb)Traktorenlexikon, “John Deere 7200”No figureNo call on maximum permissible mass: no figure on record for the H-4105 Elite.
Which has the wider choice of gears?30 to 40Traktorenlexikon, “Hürlimann 4105 Elite”12 to 16Traktorenlexikon, “John Deere 7200”AheadThe Hürlimann H-4105 Elite has 88% more forward gears (14 gears) than the John Deere 7200 (A) (both forward gears, as stated by the source).
Which offers a creeper range?No figureNo call on a creeper range: not stated for the H-4105 Elite and the 7200 (A).
Which is faster on the road?30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Hürlimann 4105 Elite”30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “John Deere 7200”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540 rpm / 1000 rpmTraktorenlexikon, “Hürlimann 4105 Elite”540/1000 rpmTraktorenlexikon, “John Deere 7200”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “John Deere 7200”No figureNo call on PTO independence: not stated for the H-4105 Elite.
Which drives on both axles?4WDTraktorenlexikon, “Hürlimann 4105 Elite”2WD / 4WDTraktorenlexikon, “John Deere 7200”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1989–19951993–1997EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The John Deere 7200 (A) has 136% more hydraulic flow (57.2 L/min / 15.1 gpm) than the Hürlimann H-4105 Elite (both pump flow, as stated by the source).
  • The John Deere 7200 (A) is 47% heavier (1,831 kg / 4,037 lb) than the Hürlimann H-4105 Elite (both unladen weight, as stated by the source).
  • The Hürlimann H-4105 Elite has 88% more forward gears (14 gears) than the John Deere 7200 (A) (both forward gears, as stated by the source).
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on power at the PTO shaft: the H-4105 Elite has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 7200 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources