Fiat 80-88/80-88 DT vs SAME Explorer 80 II (DT)
5 material differences · fewer than 12
Which should you choose?
We will not advise between these two machines, because the drive differs (4WD; Two-wheel or four-wheel drive). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
5 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | 80-88/80-88 DT | Explorer 80 II (DT) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 78.9 hp | 78.9 hp | — |
| Engine declared | — | SAME 1000.4 A 1 | — |
| Displacement declared | — | 4.00 L | — |
| Maximum torque declared | 197 lb·ft · 267 N·m | 204 lb·ft · 276 N·m | — |
| Transmission | |||
| Top speed declared | 23.6 mph · 38 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Hydraulics & hitch | |||
| Hydraulic control declared | — | Load sensing | — |
| Pump flow declared | — | 10.7 gpm · 40.5 L/min | — |
| Pressure declared | — | 1,740 psi · 120 bar | — |
| Rear PTO speeds declared | 540 rpm / 1000 rpm | 540/540E/1000E/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 7,562 lb · 3,430 kg | 6,724 lb · 3,050 kg | +12% 80-88/80-88 DT |
| Wheelbase declared | — | 95.1 in · 2,415 mm | — |
| Length declared | 144.9 in · 3,680 mm | 144.5 in · 3,670 mm | — |
| Width declared | 86.6 in · 2,200 mm | 81.1 in · 2,060 mm | +7% 80-88/80-88 DT |
| Height declared | 102.8 in · 2,610 mm | 102.2 in · 2,595 mm | — |
| Ground clearance declared | 16.9 in · 430 mm | 20.5 in · 520 mm | +21% Explorer 80 II (DT) |
| Turning radius, braked declared | — | 9.6 ft · 2.94 m | — |
| Fuel tank declared | — | 116.2 qt · 110.0 L | — |
Fiat 80-88/80-88 DT sources
Source
- Source: Traktorenlexikon, “Fiatagri 80-88/80-88 DT”
SAME Explorer 80 II (DT) sources
Source
- Source: Traktorenlexikon, “SAME Explorer II 80”
- Source: Traktorenlexikon, “SAME Explorer 80”