Fendt Favorit 711 Vario vs John Deere 6520

8 material differences · fewer than 12

Tractor one

from 1999

No measured PTO figure

Tractor two

2002–2007

No measured PTO figure

Which should you choose?

Read our verdict on the Favorit 711 Vario and the 6520 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 6 fields identical or within 5%, which is not counted as material

Fendt Favorit 711 Vario and John Deere 6520, field by field
Field	Favorit 711 Vario	6520	Gap
Engine
Engine power, claimed claimed	113.7 hp	113.5 hp	—
Engine declared	Deutz BF6M 2013 C	John Deere PowrTech 6.068 HLA-V2 or 6.068 HL-4V/CR	differs
Displacement declared	5.70 L	6.79 L	+19% 6520
Transmission
Top speed declared	31.1 mph · 50 km/h	24.9–31.1 mph · 40–50 km/h	differs
Hydraulics & hitch
Hydraulic control declared	Load sensing	Load sensing	—
Pump flow declared	29.1 gpm · 110.0 L/min	—	—
Pressure declared	2,901 psi · 200 bar	—	—
Three-point lift at ends declared	—	14,881 lb · 6,750 kg	—
Rear PTO speeds declared	540 rpm / 750 rpm / 1000 rpm	540E/540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	12,456–13,603 lb · 5,650–6,170 kg	11,199–11,773 lb · 5,080–5,340 kg	differs
Maximum permissible mass declared	20,944 lb · 9,500 kg	18,739 lb · 8,500 kg	+12% Favorit 711 Vario
Wheelbase declared	106.3 in · 2,700 mm	104.3 in · 2,650 mm	—
Length declared	181.7–182.7 in · 4,615–4,640 mm	186.1 in · 4,728 mm	—
Width declared	94.1–95.6 in · 2,390–2,429 mm	91.2 in · 2,316 mm	—
Height declared	110.3–112.6 in · 2,802–2,859 mm	112.5 in · 2,858 mm	—
Ground clearance declared	20.8 in · 528 mm	22.4 in · 570 mm	+8% 6520
Turning radius, braked declared	16.1 ft · 4.90 m	—	—
Fuel tank declared	317.0 qt · 300 L	218.7 qt · 207.0 L	+45% Favorit 711 Vario

Source

Source