Fendt Favorit 510 C or John Deere 3055?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the Favorit 510 C has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 3055 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Fendt Favorit 510 C suits loader and hydraulic implement work better on this data: 11% (10.5 L/min / 2.8 gpm) more hydraulic flow.
  • The Fendt Favorit 510 C suits heavy draft work (ploughing, cultivating) better on this data: 15% (650 kg / 1,433 lb) heavier and four-wheel drive.
  • The Fendt Favorit 510 C suits road haulage better on this data: 33% (10.0 km/h / 6.2 mph) more top speed.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Fendt Favorit 510 C and John Deere 3055, with the call on each
QuestionFavorit 510 C3055Call
Which puts more power through the PTO shaft?76.9 kW (103.1 hp)Traktorenlexikon, “Fendt Favorit 510 C”77.3 kW (103.7 hp)Traktorenlexikon, “John Deere 3055”Not comparableNot comparable on power at the PTO shaft: the Favorit 510 C has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 3055 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the Favorit 510 C and the 3055.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the Favorit 510 C and the 3055.
Which pumps more oil for implements?102.0 L/min (26.9 gpm)Traktorenlexikon, “Fendt Favorit 510 C”91.5 L/min (24.2 gpm)Traktorenlexikon, “John Deere 3055”AheadThe Fendt Favorit 510 C has 11% more hydraulic flow (10.5 L/min / 2.8 gpm) than the John Deere 3055 (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?5,508 kg (12,143 lb)Traktorenlexikon, “Fendt Favorit 510 C”No figureNo call on three-point lift: no figure on record for the 3055.
Which is heavier, for traction?4,970 kg (10,957 lb)Traktorenlexikon, “Fendt Favorit 510 C”4,320 kg (9,524 lb)Traktorenlexikon, “John Deere 3055”Ahead (a fact, not an advantage)The Fendt Favorit 510 C is 15% heavier (650 kg / 1,433 lb) than the John Deere 3055 (both unladen weight, as stated by the source).
Which may carry more ballast and load?No figureNo call on maximum permissible mass: no figure on record for the Favorit 510 C and the 3055.
Which has the wider choice of gears?44Traktorenlexikon, “Fendt Favorit 510 C”16Traktorenlexikon, “John Deere 3055”AheadThe Fendt Favorit 510 C has 175% more forward gears (28 gears) than the John Deere 3055 (both forward gears, as stated by the source).
Which offers a creeper range?YesTraktorenlexikon, “Fendt Favorit 510 C”No figureNo call on a creeper range: not stated for the 3055.
Which is faster on the road?40 km/h (24.9 mph) to 50 km/h (31.1 mph)Traktorenlexikon, “Fendt Favorit 510 C”30 km/h (18.6 mph)Traktorenlexikon, “John Deere 3055”AheadThe Fendt Favorit 510 C has 33% more top speed (10.0 km/h / 6.2 mph) than the John Deere 3055 (both top speed forward, as stated by the source).
Which offers more PTO speeds?540 rpm / 1000 rpmTraktorenlexikon, “Fendt Favorit 510 C”540/1000 rpmTraktorenlexikon, “John Deere 3055”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “John Deere 3055”No figureNo call on PTO independence: not stated for the Favorit 510 C.
Which drives on both axles?4WDTraktorenlexikon, “Fendt Favorit 510 C”2WDTraktorenlexikon, “John Deere 3055”AheadThe Fendt Favorit 510 C is available with four-wheel drive; the John Deere 3055 is two-wheel drive (as stated by the sources).
Which is newer, and what about parts?1993–20001992–1993EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Fendt Favorit 510 C has 11% more hydraulic flow (10.5 L/min / 2.8 gpm) than the John Deere 3055 (both pump flow, as stated by the source).
  • The Fendt Favorit 510 C is 15% heavier (650 kg / 1,433 lb) than the John Deere 3055 (both unladen weight, as stated by the source).
  • The Fendt Favorit 510 C has 175% more forward gears (28 gears) than the John Deere 3055 (both forward gears, as stated by the source).
  • The Fendt Favorit 510 C has 33% more top speed (10.0 km/h / 6.2 mph) than the John Deere 3055 (both top speed forward, as stated by the source).
  • The Fendt Favorit 510 C is available with four-wheel drive; the John Deere 3055 is two-wheel drive (as stated by the sources).
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on power at the PTO shaft: the Favorit 510 C has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 3055 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources