Deutz-Fahr Agrotron TTV 1130 or Fendt Xylon 522?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the Agrotron TTV 1130 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Xylon 522 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The Deutz-Fahr Agrotron TTV 1130 suits loader and hydraulic implement work better on this data: 18% (18.0 L/min / 4.8 gpm) more hydraulic flow.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | Agrotron TTV 1130 | Xylon 522 | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 92.0 kW (123.4 hp)Traktorenlexikon, “Deutz-Fahr Agrotron TTV 1130” | 92 kW (123 hp)Traktorenlexikon, “Fendt Xylon 522” | Not comparableNot comparable on power at the PTO shaft: the Agrotron TTV 1130 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Xylon 522 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the Agrotron TTV 1130 and the Xylon 522. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the Agrotron TTV 1130 and the Xylon 522. |
| Which pumps more oil for implements? | 120.0 L/min (31.7 gpm)Traktorenlexikon, “Deutz-Fahr Agrotron TTV 1130” | 102 L/min (26.9 gpm)Traktorenlexikon, “Fendt Xylon 522” | AheadThe Deutz-Fahr Agrotron TTV 1130 has 18% more hydraulic flow (18.0 L/min / 4.8 gpm) than the Fendt Xylon 522 (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 9,240 kg (20,371 lb)Traktorenlexikon, “Deutz-Fahr Agrotron TTV 1130” | 6,840 kg (15,080 lb)Traktorenlexikon, “Fendt Xylon 522” | Not comparableNot comparable on three-point lift: the Agrotron TTV 1130: lift at the hitch ends, as stated by the source (Traktorenlexikon, “Deutz-Fahr Agrotron TTV 1130”); the Xylon 522: lift at an unstated point, as stated by the source (Traktorenlexikon, “Fendt Xylon 522”) — not the same quantity, basis and condition. |
| Which is heavier, for traction? | 6,525 kg (14,385 lb)Traktorenlexikon, “Deutz-Fahr Agrotron TTV 1130” | 5,850 kg (12,897 lb)Traktorenlexikon, “Fendt Xylon 522” | Ahead (a fact, not an advantage)The Deutz-Fahr Agrotron TTV 1130 is 12% heavier (675 kg / 1,488 lb) than the Fendt Xylon 522 (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | 10,500 kg (23,149 lb)Traktorenlexikon, “Deutz-Fahr Agrotron TTV 1130” | 10,500 kg (23,149 lb)Traktorenlexikon, “Fendt Xylon 522” | EvenEven on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which has the wider choice of gears? | Stepless (CVT)Traktorenlexikon, “Deutz-Fahr Agrotron TTV 1130” | 44 forwardTraktorenlexikon, “Fendt Xylon 522” | DifferTransmissions differ in kind: the Deutz-Fahr Agrotron TTV 1130 is stepless (CVT) and the Fendt Xylon 522 has 44 forward gears — not called. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the Agrotron TTV 1130 and the Xylon 522. |
| Which is faster on the road? | 40 km/h (24.9 mph) to 50 km/h (31.1 mph)Traktorenlexikon, “Deutz-Fahr Agrotron TTV 1130” | 40 km/h (24.9 mph) to 50 km/h (31.1 mph)Traktorenlexikon, “Fendt Xylon 522” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 540 rpm / 1000 rpmTraktorenlexikon, “Deutz-Fahr Agrotron TTV 1130” | 540/750/1000/1400 rpmTraktorenlexikon, “Fendt Xylon 522” | AheadThe Fendt Xylon 522 offers 750 rpm at the PTO, which the Deutz-Fahr Agrotron TTV 1130 does not (as stated by the sources). |
| Which PTO runs independently of the ground drive? | independentTraktorenlexikon, “Deutz-Fahr Agrotron TTV 1130” | — | No figureNo call on PTO independence: not stated for the Xylon 522. |
| Which drives on both axles? | 4WDTraktorenlexikon, “Deutz-Fahr Agrotron TTV 1130” | 4WDTraktorenlexikon, “Fendt Xylon 522” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 2001–2006 | 1994–2004 | Ahead (a fact, not an advantage)The Deutz-Fahr Agrotron TTV 1130 is newer: production began 7 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Deutz-Fahr Agrotron TTV 1130 has 18% more hydraulic flow (18.0 L/min / 4.8 gpm) than the Fendt Xylon 522 (both pump flow, as stated by the source).
- The Deutz-Fahr Agrotron TTV 1130 is 12% heavier (675 kg / 1,488 lb) than the Fendt Xylon 522 (both unladen weight, as stated by the source).
- The Fendt Xylon 522 offers 750 rpm at the PTO, which the Deutz-Fahr Agrotron TTV 1130 does not (as stated by the sources).
- The Deutz-Fahr Agrotron TTV 1130 is newer: production began 7 years later. We hold no parts-availability data, so there is no call on parts.
- Even on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call.
- Transmissions differ in kind: the Deutz-Fahr Agrotron TTV 1130 is stepless (CVT) and the Fendt Xylon 522 has 44 forward gears — not called.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on drive: every machine is available with four-wheel drive.
- Not comparable on power at the PTO shaft: the Agrotron TTV 1130 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Xylon 522 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- Not comparable on three-point lift: the Agrotron TTV 1130: lift at the hitch ends, as stated by the source (Traktorenlexikon, “Deutz-Fahr Agrotron TTV 1130”); the Xylon 522: lift at an unstated point, as stated by the source (Traktorenlexikon, “Fendt Xylon 522”) — not the same quantity, basis and condition.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources