Deutz-Fahr Agrotron 6.20 vs Fendt Favorit 711 Vario

10 material differences · fewer than 12

Tractor one

1995–1997

No measured PTO figure

Tractor two

from 1999

No measured PTO figure

Which should you choose?

Read our verdict on the Agrotron 6.20 and the Favorit 711 Vario → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 3 fields identical or within 5%, which is not counted as material

Deutz-Fahr Agrotron 6.20 and Fendt Favorit 711 Vario, field by field
Field	Agrotron 6.20	Favorit 711 Vario	Gap
Engine
Engine power, claimed claimed	113.5 hp	113.7 hp	—
Engine declared	Deutz BF6M 1013 E	Deutz BF6M 2013 C	differs
Displacement declared	7.15 L	5.70 L	+25% Agrotron 6.20
Maximum torque declared	340 lb·ft · 461 N·m	—	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	31.1 mph · 50 km/h	differs
Hydraulics & hitch
Hydraulic control declared	—	Load sensing	—
Pump flow declared	21.9 gpm · 82.8 L/min	29.1 gpm · 110.0 L/min	+33% Favorit 711 Vario
Pressure declared	—	2,901 psi · 200 bar	—
Three-point lift at ends declared	20,371 lb · 9,240 kg	—	—
Rear PTO speeds declared	540/1000 rpm	540 rpm / 750 rpm / 1000 rpm	differs
Weight & dimensions
Unladen weight declared	11,817 lb · 5,360 kg	12,456–13,603 lb · 5,650–6,170 kg	differs
Maximum permissible mass declared	—	20,944 lb · 9,500 kg	—
Wheelbase declared	108.9 in · 2,767 mm	106.3 in · 2,700 mm	—
Length declared	184.3 in · 4,680 mm	181.7–182.7 in · 4,615–4,640 mm	—
Width declared	79.1 in · 2,008 mm	94.1–95.6 in · 2,390–2,429 mm	differs
Height declared	116.3 in · 2,955 mm	110.3–112.6 in · 2,802–2,859 mm	differs
Ground clearance declared	22.8 in · 580 mm	20.8 in · 528 mm	+10% Agrotron 6.20
Turning radius, braked declared	—	16.1 ft · 4.90 m	—
Fuel tank declared	285.3 qt · 270 L	317.0 qt · 300 L	+11% Favorit 711 Vario

Source

Source