Deutz-Fahr Agrotron 150 MK3 vs Steyr 8180 a

12 material differences

Tractor one

2000–2003

No measured PTO figure

Tractor two

1986–1993

No measured PTO figure

Which should you choose?

Read our verdict on the Agrotron 150 MK3 and the 8180 a → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 3 fields identical or within 5%, which is not counted as material

Deutz-Fahr Agrotron 150 MK3 and Steyr 8180 a, field by field
Field	Agrotron 150 MK3	8180 a	Gap
Engine
Engine power, claimed claimed	148.0 hp	158.0 hp	+7% 8180 a
Engine declared	Deutz BF6M 1013 E	Steyr WD 612.96	differs
Displacement declared	7.15 L	6.60 L	+8% Agrotron 150 MK3
Maximum torque declared	430 lb·ft · 583 N·m	466 lb·ft · 632 N·m	+8% 8180 a
Transmission
Top speed declared	24.9–31.1 mph · 40–50 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Hydraulically operated wet ZF multi-disc clutch with eight plates	—	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	19.2 gpm · 72.8 L/min	13.8 gpm · 52.4 L/min	+39% Agrotron 150 MK3
Pressure declared	—	3,553 psi · 245 bar	—
Three-point lift at ends declared	20,371 lb · 9,240 kg	14,595 lb · 6,620 kg	+40% Agrotron 150 MK3
Rear PTO speeds declared	540 rpm / 1000 rpm	1000 rpm	differs
Weight & dimensions
Unladen weight declared	11,883 lb · 5,390 kg	13,254 lb · 6,012 kg	+12% 8180 a
Maximum permissible mass declared	20,944 lb · 9,500 kg	18,739 lb · 8,500 kg	+12% Agrotron 150 MK3
Wheelbase declared	108.9 in · 2,767 mm	106.3 in · 2,700 mm	—
Length declared	187.3 in · 4,757 mm	201.8 in · 5,125 mm	+8% 8180 a
Width declared	97.2 in · 2,470 mm	97.2 in · 2,470 mm	—
Height declared	116.4 in · 2,956 mm	113.4 in · 2,880 mm	—
Ground clearance declared	22.4 in · 570 mm	19.9 in · 505 mm	+13% Agrotron 150 MK3
Turning radius, braked declared	—	16.3 ft · 4.97 m	—
Fuel tank declared	285.3 qt · 270 L	253.6 qt · 240.0 L	+13% Agrotron 150 MK3

Source

Source