Deutz-Fahr Agrotron 150 MK3 vs Lamborghini Rubin 150

10 material differences · fewer than 12

Tractor one

2000–2003

No measured PTO figure

Tractor two

1998–2004

No measured PTO figure

Which should you choose?

Read our verdict on the Agrotron 150 MK3 and the Rubin 150 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 7 fields identical or within 5%, which is not counted as material

Deutz-Fahr Agrotron 150 MK3 and Lamborghini Rubin 150, field by field
Field	Agrotron 150 MK3	Rubin 150	Gap
Engine
Engine power, claimed claimed	148.0 hp	147.9 hp	—
Engine declared	Deutz BF6M 1013 E	SAME-DEUTZ-FAHR 1000.6 WTI-1	differs
Displacement declared	7.15 L	6.00 L	+19% Agrotron 150 MK3
Maximum torque declared	430 lb·ft · 583 N·m	445 lb·ft · 604 N·m	—
Transmission
Top speed declared	24.9–31.1 mph · 40–50 km/h	24.9 mph · 40 km/h	differs
Clutch declared	Hydraulically operated wet ZF multi-disc clutch with eight plates	Hydraulically operated wet multi-disc clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	19.2 gpm · 72.8 L/min	18.6 gpm · 70.5 L/min	—
Pressure declared	—	3,046 psi · 210 bar	—
Three-point lift at ends declared	20,371 lb · 9,240 kg	18,960 lb · 8,600 kg	+7% Agrotron 150 MK3
Rear PTO speeds declared	540 rpm / 1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	11,883 lb · 5,390 kg	15,091 lb · 6,845 kg	+27% Rubin 150
Maximum permissible mass declared	20,944 lb · 9,500 kg	23,149 lb · 10,500 kg	+11% Rubin 150
Wheelbase declared	108.9 in · 2,767 mm	108.3 in · 2,750 mm	—
Length declared	187.3 in · 4,757 mm	183.9 in · 4,670 mm	—
Width declared	97.2 in · 2,470 mm	96.5 in · 2,450 mm	—
Height declared	116.4 in · 2,956 mm	113.4 in · 2,880 mm	—
Ground clearance declared	22.4 in · 570 mm	20.5 in · 520 mm	+10% Agrotron 150 MK3
Turning radius, braked declared	—	13.1 ft · 3.99 m	—
Fuel tank declared	285.3 qt · 270 L	401.5 qt · 380.0 L	+41% Rubin 150

Source

Source