Deutz-Fahr Agrotron 150.7 vs Steyr CVT 150

6 material differences · fewer than 12

Tractor one

2005–2007

No measured PTO figure

Tractor two

2000–2003

No measured PTO figure

Which should you choose?

Read our verdict on the Agrotron 150.7 and the CVT 150 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

6 material differences · 10 fields identical or within 5%, which is not counted as material

Deutz-Fahr Agrotron 150.7 and Steyr CVT 150, field by field
Field	Agrotron 150.7	CVT 150	Gap
Engine
Engine power, claimed claimed	143.1 hp	148.0 hp	—
Engine declared	Deutz BF6M 1013 EC	SISU WD 629.89	differs
Displacement declared	7.15 L	6.60 L	+8% Agrotron 150.7
Maximum torque declared	434 lb·ft · 588 N·m	427 lb·ft · 579 N·m	—
Transmission
Top speed declared	24.9–31.1 mph · 40–50 km/h	24.9–31.1 mph · 40–50 km/h	—
Clutch declared	Hydraulically actuated wet ZF multi-plate clutch	—	—
Hydraulics & hitch
Hydraulic control declared	Load sensing	—	—
Pump flow declared	30.3 gpm · 114.8 L/min	32.1 gpm · 121.5 L/min	+6% CVT 150
Pressure declared	2,872 psi · 198 bar	2,973 psi · 205 bar	—
Three-point lift at ends declared	20,371 lb · 9,240 kg	—	—
Rear PTO speeds declared	540 rpm / 1000 rpm	540 rpm / 1000 rpm	—
Weight & dimensions
Unladen weight declared	12,963 lb · 5,880 kg	13,823 lb · 6,270 kg	+7% CVT 150
Maximum permissible mass declared	20,944 lb · 9,500 kg	24,251 lb · 11,000 kg	+16% CVT 150
Wheelbase declared	108.9 in · 2,767 mm	111.5 in · 2,832 mm	—
Length declared	187.3 in · 4,757 mm	190.9 in · 4,850 mm	—
Width declared	97.2 in · 2,470 mm	97.8 in · 2,485 mm	—
Height declared	118.0 in · 2,997 mm	119.5 in · 3,035 mm	—
Ground clearance declared	22.4 in · 570 mm	19.7 in · 500 mm	+14% Agrotron 150.7
Turning radius, braked declared	—	19.2 ft · 5.84 m	—
Fuel tank declared	322.3 qt · 305 L	327.6 qt · 310.0 L	—

Source

Source