Deutz-Fahr Agrotron 135 MK3 or New Holland T 6050 RC/PC?

Which should you choose?

The figures split: the Deutz-Fahr Agrotron 135 MK3 is ahead on three-point lift and forward gears; the New Holland T 6050 RC/PC is ahead on maximum permissible mass.

  • The Deutz-Fahr Agrotron 135 MK3 suits loader and hydraulic implement work better on this data: 12% (983 kg / 2,167 lb) more three-point lift.
  • The New Holland T 6050 RC/PC suits road haulage better on this data: 17% (1,500 kg / 3,307 lb) more maximum permissible mass.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Deutz-Fahr Agrotron 135 MK3 and New Holland T 6050 RC/PC, with the call on each
QuestionAgrotron 135 MK3T 6050 RC/PCCall
Which puts more power through the PTO shaft?89.7 kW (120.2 hp)Traktorenlexikon, “Deutz-Fahr Agrotron 135 MK3”89.1 kW (119.5 hp)Traktorenlexikon, “New Holland T6050 RC und PC”EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the Agrotron 135 MK3 and the T 6050 RC/PC.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the Agrotron 135 MK3 and the T 6050 RC/PC.
Which pumps more oil for implements?104.9 L/min (27.7 gpm)Traktorenlexikon, “New Holland T6050 RC und PC”No figureNo call on hydraulic flow: no figure on record for the Agrotron 135 MK3.
Which lifts more on the three-point hitch?9,240 kg (20,371 lb)Traktorenlexikon, “Deutz-Fahr Agrotron 135 MK3”8,257 kg (18,204 lb)Traktorenlexikon, “New Holland T6050 RC und PC”AheadThe Deutz-Fahr Agrotron 135 MK3 has 12% more lift (983 kg / 2,167 lb) than the New Holland T 6050 RC/PC (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?5,360 kg (11,817 lb)Traktorenlexikon, “Deutz-Fahr Agrotron 135 MK3”6,090 kg (13,426 lb)Traktorenlexikon, “New Holland T6050 RC und PC”Ahead (a fact, not an advantage)The New Holland T 6050 RC/PC is 14% heavier (730 kg / 1,609 lb) than the Deutz-Fahr Agrotron 135 MK3 (both unladen weight, as stated by the source).
Which may carry more ballast and load?9,000 kg (19,842 lb)Traktorenlexikon, “Deutz-Fahr Agrotron 135 MK3”10,500 kg (23,149 lb)Traktorenlexikon, “New Holland T6050 RC und PC”AheadThe New Holland T 6050 RC/PC has 17% higher maximum permissible mass (1,500 kg / 3,307 lb) than the Deutz-Fahr Agrotron 135 MK3 (both maximum permissible mass, as stated by the source).
Which has the wider choice of gears?24Traktorenlexikon, “Deutz-Fahr Agrotron 135 MK3”18 to 19Traktorenlexikon, “New Holland T6050 RC und PC”AheadThe Deutz-Fahr Agrotron 135 MK3 has 26% more forward gears (5 gears) than the New Holland T 6050 RC/PC (both forward gears, as stated by the source).
Which offers a creeper range?No figureNo call on a creeper range: not stated for the Agrotron 135 MK3 and the T 6050 RC/PC.
Which is faster on the road?40 km/h (24.9 mph) to 50 km/h (31.1 mph)Traktorenlexikon, “Deutz-Fahr Agrotron 135 MK3”40 km/h (24.9 mph) to 50 km/h (31.1 mph)Traktorenlexikon, “New Holland T6050 RC und PC”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540 rpm / 1000 rpmTraktorenlexikon, “Deutz-Fahr Agrotron 135 MK3”540/540E/1000 rpmTraktorenlexikon, “New Holland T6050 RC und PC”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Deutz-Fahr Agrotron 135 MK3”independentTraktorenlexikon, “New Holland T6050 RC und PC”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?4WDTraktorenlexikon, “Deutz-Fahr Agrotron 135 MK3”4WDTraktorenlexikon, “New Holland T6050 RC und PC”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?2000–20032007–2012Ahead (a fact, not an advantage)The New Holland T 6050 RC/PC is newer: production began 7 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Deutz-Fahr Agrotron 135 MK3 has 12% more lift (983 kg / 2,167 lb) than the New Holland T 6050 RC/PC (both lift at the hitch ends, as stated by the source).
  • The New Holland T 6050 RC/PC is 14% heavier (730 kg / 1,609 lb) than the Deutz-Fahr Agrotron 135 MK3 (both unladen weight, as stated by the source).
  • The New Holland T 6050 RC/PC has 17% higher maximum permissible mass (1,500 kg / 3,307 lb) than the Deutz-Fahr Agrotron 135 MK3 (both maximum permissible mass, as stated by the source).
  • The Deutz-Fahr Agrotron 135 MK3 has 26% more forward gears (5 gears) than the New Holland T 6050 RC/PC (both forward gears, as stated by the source).
  • The New Holland T 6050 RC/PC is newer: production began 7 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on PTO independence: every PTO is independent.
  • Even on drive: every machine is available with four-wheel drive.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow and a creeper range.

← Every figure for both machines, side by side, with sources