Deutz-Fahr Agrotron 120 MK3 or New Holland T 6030 Plus?

Which should you choose?

On performance, every comparable figure that differs favours the Deutz-Fahr Agrotron 120 MK3: three-point lift.

  • The Deutz-Fahr Agrotron 120 MK3 suits loader and hydraulic implement work better on this data: 17% (1,376 kg / 3,034 lb) more three-point lift.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Deutz-Fahr Agrotron 120 MK3 and New Holland T 6030 Plus, with the call on each
QuestionAgrotron 120 MK3T 6030 PlusCall
Which puts more power through the PTO shaft?80.3 kW (107.7 hp)Traktorenlexikon, “Deutz-Fahr Agrotron 120 MK3”79.8 kW (107.0 hp)Traktorenlexikon, “New Holland T 6030 Plus”EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the Agrotron 120 MK3 and the T 6030 Plus.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the Agrotron 120 MK3 and the T 6030 Plus.
Which pumps more oil for implements?72.8 L/min (19.2 gpm)Traktorenlexikon, “Deutz-Fahr Agrotron 120 MK3”78.7 L/min (20.8 gpm)Traktorenlexikon, “New Holland T 6030 Plus”EvenEven on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call.
Which lifts more on the three-point hitch?9,240 kg (20,371 lb)Traktorenlexikon, “Deutz-Fahr Agrotron 120 MK3”7,864 kg (17,337 lb)Traktorenlexikon, “New Holland T 6030 Plus”AheadThe Deutz-Fahr Agrotron 120 MK3 has 17% more lift (1,376 kg / 3,034 lb) than the New Holland T 6030 Plus (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?5,360 kg (11,817 lb)Traktorenlexikon, “Deutz-Fahr Agrotron 120 MK3”5,330 kg (11,751 lb)Traktorenlexikon, “New Holland T 6030 Plus”EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
Which may carry more ballast and load?9,000 kg (19,842 lb)Traktorenlexikon, “New Holland T 6030 Plus”No figureNo call on maximum permissible mass: no figure on record for the Agrotron 120 MK3.
Which has the wider choice of gears?24Traktorenlexikon, “Deutz-Fahr Agrotron 120 MK3”16 to 24Traktorenlexikon, “New Holland T 6030 Plus”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the Agrotron 120 MK3 and the T 6030 Plus.
Which is faster on the road?40 km/h (24.9 mph) to 50 km/h (31.1 mph)Traktorenlexikon, “Deutz-Fahr Agrotron 120 MK3”40 km/h (24.9 mph) to 50 km/h (31.1 mph)Traktorenlexikon, “New Holland T 6030 Plus”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540 rpm / 1000 rpmTraktorenlexikon, “Deutz-Fahr Agrotron 120 MK3”540/540E/1000 rpmTraktorenlexikon, “New Holland T 6030 Plus”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Deutz-Fahr Agrotron 120 MK3”independentTraktorenlexikon, “New Holland T 6030 Plus”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?4WDTraktorenlexikon, “Deutz-Fahr Agrotron 120 MK3”4WDTraktorenlexikon, “New Holland T 6030 Plus”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?2000–20032007–2012Ahead (a fact, not an advantage)The New Holland T 6030 Plus is newer: production began 7 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Deutz-Fahr Agrotron 120 MK3 has 17% more lift (1,376 kg / 3,034 lb) than the New Holland T 6030 Plus (both lift at the hitch ends, as stated by the source).
  • The New Holland T 6030 Plus is newer: production began 7 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
  • Even on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on PTO independence: every PTO is independent.
  • Even on drive: every machine is available with four-wheel drive.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass and a creeper range.

← Every figure for both machines, side by side, with sources