Deutz-Fahr Agrotron 120 MK3 or Hürlimann H-6115 Elite?
Which should you choose?
On performance, every comparable figure that differs favours the Deutz-Fahr Agrotron 120 MK3: hydraulic flow.
- The Deutz-Fahr Agrotron 120 MK3 suits loader and hydraulic implement work better on this data: 20% (11.9 L/min / 3.1 gpm) more hydraulic flow.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | Agrotron 120 MK3 | H-6115 Elite | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 80.3 kW (107.7 hp)Traktorenlexikon, “Deutz-Fahr Agrotron 120 MK3” | 79.4 kW (106.5 hp)Traktorenlexikon, “Hürlimann 6115 XB Elite” | EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the Agrotron 120 MK3 and the H-6115 Elite. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the Agrotron 120 MK3 and the H-6115 Elite. |
| Which pumps more oil for implements? | 72.8 L/min (19.2 gpm)Traktorenlexikon, “Deutz-Fahr Agrotron 120 MK3” | 60.9 L/min (16.1 gpm)Traktorenlexikon, “Hürlimann 6115 XB Elite” | AheadThe Deutz-Fahr Agrotron 120 MK3 has 20% more hydraulic flow (11.9 L/min / 3.1 gpm) than the Hürlimann H-6115 Elite (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 9,240 kg (20,371 lb)Traktorenlexikon, “Deutz-Fahr Agrotron 120 MK3” | 5,091 kg (11,224 lb)Traktorenlexikon, “Hürlimann 6115 XB Elite” | Not comparableNot comparable on three-point lift: the Agrotron 120 MK3: lift at the hitch ends, as stated by the source (Traktorenlexikon, “Deutz-Fahr Agrotron 120 MK3”); the H-6115 Elite: lift through the full range at an unstated point, as stated by the source (Traktorenlexikon, “Hürlimann 6115 XB Elite”) — not the same quantity, basis and condition. |
| Which is heavier, for traction? | 5,360 kg (11,817 lb)Traktorenlexikon, “Deutz-Fahr Agrotron 120 MK3” | 4,880 kg (10,759 lb)Traktorenlexikon, “Hürlimann 6115 XB Elite” | EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which may carry more ballast and load? | — | — | No figureNo call on maximum permissible mass: no figure on record for the Agrotron 120 MK3 and the H-6115 Elite. |
| Which has the wider choice of gears? | 24Traktorenlexikon, “Deutz-Fahr Agrotron 120 MK3” | 24Traktorenlexikon, “Hürlimann 6115 XB Elite” | EvenEven on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the Agrotron 120 MK3 and the H-6115 Elite. |
| Which is faster on the road? | 40 km/h (24.9 mph) to 50 km/h (31.1 mph)Traktorenlexikon, “Deutz-Fahr Agrotron 120 MK3” | 30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Hürlimann 6115 XB Elite” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 540 rpm / 1000 rpmTraktorenlexikon, “Deutz-Fahr Agrotron 120 MK3” | 540/1000/540E/1000E rpmTraktorenlexikon, “Hürlimann 6115 XB Elite” | EvenEven on PTO speeds: the same speeds (540, 1000 rpm). |
| Which PTO runs independently of the ground drive? | independentTraktorenlexikon, “Deutz-Fahr Agrotron 120 MK3” | — | No figureNo call on PTO independence: not stated for the H-6115 Elite. |
| Which drives on both axles? | 4WDTraktorenlexikon, “Deutz-Fahr Agrotron 120 MK3” | 4WDTraktorenlexikon, “Hürlimann 6115 XB Elite” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 2000–2003 | 1991–1996 | Ahead (a fact, not an advantage)The Deutz-Fahr Agrotron 120 MK3 is newer: production began 9 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Deutz-Fahr Agrotron 120 MK3 has 20% more hydraulic flow (11.9 L/min / 3.1 gpm) than the Hürlimann H-6115 Elite (both pump flow, as stated by the source).
- The Deutz-Fahr Agrotron 120 MK3 is newer: production began 9 years later. We hold no parts-availability data, so there is no call on parts.
- Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
- Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on PTO speeds: the same speeds (540, 1000 rpm).
- Even on drive: every machine is available with four-wheel drive.
- Not comparable on three-point lift: the Agrotron 120 MK3: lift at the hitch ends, as stated by the source (Traktorenlexikon, “Deutz-Fahr Agrotron 120 MK3”); the H-6115 Elite: lift through the full range at an unstated point, as stated by the source (Traktorenlexikon, “Hürlimann 6115 XB Elite”) — not the same quantity, basis and condition.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources