Deutz-Fahr Agrotron 110 MK3 vs John Deere 3055

12 material differences

Tractor one

2000–2003

No measured PTO figure

Tractor two

1992–1993

No measured PTO figure

Which should you choose?

Read our verdict on the Agrotron 110 MK3 and the 3055 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 4 fields identical or within 5%, which is not counted as material

Deutz-Fahr Agrotron 110 MK3 and John Deere 3055, field by field
Field	Agrotron 110 MK3	3055	Gap
Engine
Engine power, claimed claimed	103.7 hp	103.7 hp	—
Engine declared	Deutz. BF6M 1012 E	John Deere 6.359 DL-011	differs
Displacement declared	4.79 L	5.88 L	+23% 3055
Maximum torque declared	306 lb·ft · 415 N·m	285 lb·ft · 387 N·m	+7% Agrotron 110 MK3
Transmission
Top speed declared	24.9–31.1 mph · 40–50 km/h	18.6 mph · 30 km/h	differs
Clutch declared	Hydraulically operated wet ZF multi-disc clutch	Pedal-operated, dry LuK single-disc clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	Closed centre	differs
Hydraulic control declared	Load sensing	—	—
Pump flow declared	21.9 gpm · 83.0 L/min	24.2 gpm · 91.5 L/min	+10% 3055
Pressure declared	—	3,336 psi · 230 bar	—
Three-point lift at ends declared	13,713 lb · 6,220 kg	—	—
Rear PTO speeds declared	540 rpm / 1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	11,045 lb · 5,010 kg	9,524 lb · 4,320 kg	+16% Agrotron 110 MK3
Maximum permissible mass declared	18,739 lb · 8,500 kg	—	—
Wheelbase declared	104.2 in · 2,647 mm	100.4 in · 2,551 mm	—
Length declared	178.0 in · 4,520 mm	166.9 in · 4,240 mm	+7% Agrotron 110 MK3
Width declared	90.7 in · 2,304 mm	89.0 in · 2,260 mm	—
Height declared	113.0 in · 2,870 mm	107.7 in · 2,735 mm	—
Ground clearance declared	20.5 in · 520 mm	17.3 in · 440 mm	+18% Agrotron 110 MK3
Turning radius, braked declared	—	13.2 ft · 4.01 m	—
Fuel tank declared	285.3 qt · 270 L	127.9 qt · 121.0 L	+123% Agrotron 110 MK3

Source

Source