Deutz-Fahr Agrotron 110 MK3 vs Deutz-Fahr Agrotron K 110 (Profiline)

6 material differences · fewer than 12

Tractor one

2000–2003

No measured PTO figure

Tractor two

2005–2008

No measured PTO figure

Which should you choose?

Read our verdict on the Agrotron 110 MK3 and the Agrotron K 110 (Profiline) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

6 material differences · 10 fields identical or within 5%, which is not counted as material

Deutz-Fahr Agrotron 110 MK3 and Deutz-Fahr Agrotron K 110 (Profiline), field by field
Field	Agrotron 110 MK3	Agrotron K 110 (Profiline)	Gap
Engine
Engine power, claimed claimed	103.7 hp	102.6 hp	—
Engine declared	Deutz. BF6M 1012 E	Deutz BF6M 2012 C	differs
Displacement declared	4.79 L	6.06 L	+27% Agrotron K 110 (Profiline)
Maximum torque declared	306 lb·ft · 415 N·m	308 lb·ft · 418 N·m	—
Transmission
Top speed declared	24.9–31.1 mph · 40–50 km/h	24.9–31.1 mph · 40–50 km/h	—
Clutch declared	Hydraulically operated wet ZF multi-disc clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	Open centre	—
Hydraulic control declared	Load sensing	—	—
Pump flow declared	21.9 gpm · 83.0 L/min	—	—
Three-point lift at ends declared	13,713 lb · 6,220 kg	13,713 lb · 6,220 kg	—
Rear PTO speeds declared	540 rpm / 1000 rpm	540 rpm / 1000 rpm	—
Weight & dimensions
Unladen weight declared	11,045 lb · 5,010 kg	10,692 lb · 4,850 kg	—
Maximum permissible mass declared	18,739 lb · 8,500 kg	17,637 lb · 8,000 kg	+6% Agrotron 110 MK3
Wheelbase declared	104.2 in · 2,647 mm	104.2 in · 2,647 mm	—
Length declared	178.0 in · 4,520 mm	171.9 in · 4,367 mm	—
Width declared	90.7 in · 2,304 mm	88.8 in · 2,256 mm	—
Height declared	113.0 in · 2,870 mm	104.7 in · 2,660 mm	+8% Agrotron 110 MK3
Ground clearance declared	20.5 in · 520 mm	19.1 in · 485 mm	+7% Agrotron 110 MK3
Fuel tank declared	285.3 qt · 270 L	190.2 qt · 180 L	+50% Agrotron 110 MK3

Source

Source