Deutz-Fahr Agroplus 75 vs VALMET 6200-4
8 material differences · fewer than 12
Which should you choose?
Read our verdict on the Agroplus 75 and the 6200-4 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | Agroplus 75 | 6200-4 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 74.0 hp | 74.0 hp | — |
| Engine declared | — | VALMET 420 DSRE (44 DT) | — |
| Displacement declared | — | 4.40 L | — |
| Maximum torque declared | 218 lb·ft · 295 N·m | — | — |
| Transmission | |||
| Top speed declared | 24.9 mph · 40 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | — | — |
| Pump flow declared | — | 21.2 gpm · 80.3 L/min | — |
| Three-point lift at ends declared | 7,937 lb · 3,600 kg | 9,601 lb · 4,355 kg | +21% 6200-4 |
| Rear PTO speeds declared | 540/1000 rpm | 540 rpm / 1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 7,562 lb · 3,430 kg | 8,929–9,193 lb · 4,050–4,170 kg | differs |
| Maximum permissible mass declared | 13,669 lb · 6,200 kg | 14,330 lb · 6,500 kg | — |
| Wheelbase declared | 93.7 in · 2,380 mm | 91.6 in · 2,327 mm | — |
| Length declared | 145.7 in · 3,700 mm | 177.7 in · 4,514 mm | +22% 6200-4 |
| Width declared | 81.1 in · 2,060 mm | 85.9 in · 2,181 mm | +6% 6200-4 |
| Height declared | 103.3 in · 2,624 mm | 106.3 in · 2,700 mm | — |
| Ground clearance declared | 15.4–19.8 in · 392–502 mm | 16.9 in · 430 mm | differs |
| Turning radius, braked declared | — | 15.3 ft · 4.65 m | — |
| Fuel tank declared | 147.9 qt · 140 L | 167.0 qt · 158.0 L | +13% 6200-4 |
Deutz-Fahr Agroplus 75 sources
Source
- Source: Traktorenlexikon, “Deutz-Fahr Agroplus 75”
VALMET 6200-4 sources
Source
- Source: Traktorenlexikon, “Valmet 6200”