Deutz-Fahr Agroplus 420 ( Profiline ) vs Hürlimann H-100 XA

4 material differences · fewer than 12

Tractor one

from 2009

No measured PTO figure

Tractor two

2009–2014

No measured PTO figure

Which should you choose?

Read our verdict on the Agroplus 420 ( Profiline ) and the H-100 XA → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

4 material differences · 10 fields identical or within 5%, which is not counted as material

Deutz-Fahr Agroplus 420 ( Profiline ) and Hürlimann H-100 XA, field by field
Field	Agroplus 420 ( Profiline )	H-100 XA	Gap
Engine
Engine power, claimed claimed	94 hp	93.6 hp	—
Engine declared	Same 1000.4 WTI 2 E3	Hürlimann 1000.4 WTI	differs
Displacement declared	4.00 L	4.00 L	—
Maximum torque declared	275 lb·ft · 373 N·m	278 lb·ft · 377 N·m	—
Transmission
Top speed declared	24.9 mph · 40 km/h	24.9–31.1 mph · 40–50 km/h	differs
Clutch declared	Hydraulically operated single dry clutch	—	—
Hydraulics & hitch
Hydraulic control declared	—	Load sensing	—
Pump flow declared	10.8 gpm · 41.0 L/min	—	—
Pressure declared	—	3,046 psi · 210 bar	—
Rear PTO speeds declared	540/540E/1000 rpm	540 rpm / 1000 rpm	differs
Weight & dimensions
Unladen weight declared	7,518 lb · 3,410 kg	7,275 lb · 3,300 kg	—
Maximum permissible mass declared	—	11,464 lb · 5,200 kg	—
Wheelbase declared	87.8 in · 2,230 mm	86.0 in · 2,185 mm	—
Length declared	140.2 in · 3,560 mm	140.2 in · 3,560 mm	—
Width declared	81.5–91.7 in · 2,070–2,330 mm	81.5 in · 2,070 mm	differs
Height declared	96.7 in · 2,455 mm	96.1 in · 2,440 mm	—
Ground clearance declared	15.4 in · 390 mm	15.4 in · 390 mm	—
Turning radius, braked declared	12.8 ft · 3.90 m	12.5 ft · 3.80 m	—
Fuel tank declared	95.1 qt · 90 L	95.1 qt · 90.0 L	—

Source

Source