Deutz-Fahr Agroplus 320 vs John Deere 6130

12 material differences

Tractor one

from 2009

No measured PTO figure

Tractor two

2006–2012

No measured PTO figure

Which should you choose?

Read our verdict on the Agroplus 320 and the 6130 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 2 fields identical or within 5%, which is not counted as material

Deutz-Fahr Agroplus 320 and John Deere 6130, field by field
Field	Agroplus 320	6130	Gap
Engine
Engine power, claimed claimed	80 hp	81.0 hp	—
Engine declared	Same 1000.3 WTI 2 E3	John Deere PowrTech 4.045 TI/V2-CR	differs
Displacement declared	3.00 L	4.53 L	+51% 6130
Maximum torque declared	229 lb·ft · 310 N·m	294 lb·ft · 399 N·m	+29% 6130
Transmission
Top speed declared	24.9 mph · 40 km/h	24.9 mph · 40 km/h	—
Clutch declared	Hydraulically operated single-plate dry clutch	Pedal-operated hydraulic wet Perma-Clutch II multi-disc clutch	differs
Hydraulics & hitch
Hydraulic control declared	—	Load sensing	—
Pump flow declared	10.8 gpm · 41 L/min	—	—
Pressure declared	—	2,785–3,002 psi · 192–207 bar	—
Three-point lift at ends declared	—	8,378 lb · 3,800 kg	—
Rear PTO speeds declared	540/540E/1000 rpm	540E/540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	7,518 lb · 3,410 kg	10,472 lb · 4,750 kg	+39% 6130
Maximum permissible mass declared	—	16,755 lb · 7,600 kg	—
Wheelbase declared	82.7 in · 2,100 mm	94.5 in · 2,400 mm	+14% 6130
Length declared	140.2 in · 3,560 mm	168.9 in · 4,289 mm	+20% 6130
Width declared	81.5–91.7 in · 2,070–2,330 mm	89.6 in · 2,275 mm	differs
Height declared	96.7 in · 2,455 mm	107.0 in · 2,718 mm	+11% 6130
Ground clearance declared	15.4 in · 390 mm	17.7 in · 450 mm	+15% 6130
Fuel tank declared	95.1 qt · 90 L	174.4 qt · 165.0 L	+83% 6130

Source

Source