Deutz-Fahr Agroplus 310 vs Hürlimann H-60 XA
5 material differences · fewer than 12
Which should you choose?
Read our verdict on the Agroplus 310 and the H-60 XA → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
5 material differences · 8 fields identical or within 5%, which is not counted as material
| Field | Agroplus 310 | H-60 XA | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 62.4 hp | 61.2 hp | — |
| Engine declared | Same 1000.3 WTE3 | Hürlimann 1000.3 WT | differs |
| Displacement declared | 3.00 L | 3.00 L | — |
| Maximum torque declared | 180 lb·ft · 244 N·m | 177 lb·ft · 240 N·m | — |
| Transmission | |||
| Top speed declared | 24.9 mph · 40 km/h | 24.9–31.1 mph · 40–50 km/h | differs |
| Hydraulics & hitch | |||
| Hydraulic control declared | — | Load sensing | — |
| Pump flow declared | — | 8.4 gpm · 31.9 L/min | — |
| Pressure declared | — | 3,046 psi · 210 bar | — |
| Three-point lift at ends declared | — | 6,614 lb · 3,000 kg | — |
| Rear PTO speeds declared | 540 rpm / 1000 rpm | 540 rpm / 1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 7,121 lb · 3,230 kg | 6,173 lb · 2,800 kg | +15% Agroplus 310 |
| Maximum permissible mass declared | — | 11,023 lb · 5,000 kg | — |
| Wheelbase declared | 82.7 in · 2,100 mm | 80.9 in · 2,056 mm | — |
| Length declared | 140.6 in · 3,570 mm | 135.0 in · 3,430 mm | — |
| Width declared | 76.4–88.2 in · 1,940–2,240 mm | 75.6 in · 1,920 mm | differs |
| Height declared | 96.9 in · 2,460 mm | 94.5 in · 2,400 mm | — |
| Ground clearance declared | 15.7 in · 398 mm | 14.2 in · 360 mm | +11% Agroplus 310 |
| Turning radius, braked declared | — | 12.0 ft · 3.65 m | — |
| Fuel tank declared | 95.1 qt · 90 L | 95.1 qt · 90.0 L | — |
Deutz-Fahr Agroplus 310 sources
Source
- Source: Traktorenlexikon, “Deutz-Fahr Agroplus 310”
Hürlimann H-60 XA sources
Source
- Source: Traktorenlexikon, “Hürlimann XA 60”