Deutz-Fahr Agrofarm 85 or Deutz-Fahr Agrotron 80?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the Agrofarm 85 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Agrotron 80 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Deutz-Fahr Agrotron 80 suits loader and hydraulic implement work better on this data: 19% (10.5 L/min / 2.8 gpm) more hydraulic flow.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Deutz-Fahr Agrofarm 85 and Deutz-Fahr Agrotron 80, with the call on each
QuestionAgrofarm 85Agrotron 80Call
Which puts more power through the PTO shaft?55.9 kW (75.0 hp)Traktorenlexikon, “Deutz-Fahr Agrofarm 85”55.2 kW (74.0 hp)Traktorenlexikon, “Deutz-Fahr Agrotron 80”Not comparableNot comparable on power at the PTO shaft: the Agrofarm 85 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Agrotron 80 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the Agrofarm 85 and the Agrotron 80.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the Agrofarm 85 and the Agrotron 80.
Which pumps more oil for implements?55.5 L/min (14.7 gpm)Traktorenlexikon, “Deutz-Fahr Agrofarm 85”66.0 L/min (17.4 gpm)Traktorenlexikon, “Deutz-Fahr Agrotron 80”AheadThe Deutz-Fahr Agrotron 80 has 19% more hydraulic flow (10.5 L/min / 2.8 gpm) than the Deutz-Fahr Agrofarm 85 (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?6,220 kg (13,713 lb)Traktorenlexikon, “Deutz-Fahr Agrotron 80”No figureNo call on three-point lift: no figure on record for the Agrofarm 85.
Which is heavier, for traction?3,800 kg (8,378 lb)Traktorenlexikon, “Deutz-Fahr Agrofarm 85”3,970 kg (8,752 lb)Traktorenlexikon, “Deutz-Fahr Agrotron 80”EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
Which may carry more ballast and load?6,100 kg (13,448 lb)Traktorenlexikon, “Deutz-Fahr Agrofarm 85”6,500 kg (14,330 lb)Traktorenlexikon, “Deutz-Fahr Agrotron 80”EvenEven on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call.
Which has the wider choice of gears?20Traktorenlexikon, “Deutz-Fahr Agrofarm 85”21 to 24Traktorenlexikon, “Deutz-Fahr Agrotron 80”EvenEven on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the Agrofarm 85 and the Agrotron 80.
Which is faster on the road?40 km/h (24.9 mph)Traktorenlexikon, “Deutz-Fahr Agrofarm 85”30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Deutz-Fahr Agrotron 80”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540 rpm / 1000 rpmTraktorenlexikon, “Deutz-Fahr Agrofarm 85”540/1000 rpmTraktorenlexikon, “Deutz-Fahr Agrotron 80”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Deutz-Fahr Agrofarm 85”independentTraktorenlexikon, “Deutz-Fahr Agrotron 80”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?4WDTraktorenlexikon, “Deutz-Fahr Agrofarm 85”4WDTraktorenlexikon, “Deutz-Fahr Agrotron 80”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?2007–20081997–2001Ahead (a fact, not an advantage)The Deutz-Fahr Agrofarm 85 is newer: production began 10 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Deutz-Fahr Agrotron 80 has 19% more hydraulic flow (10.5 L/min / 2.8 gpm) than the Deutz-Fahr Agrofarm 85 (both pump flow, as stated by the source).
  • The Deutz-Fahr Agrofarm 85 is newer: production began 10 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on PTO independence: every PTO is independent.
  • Even on drive: every machine is available with four-wheel drive.
  • Not comparable on power at the PTO shaft: the Agrofarm 85 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Agrotron 80 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift and a creeper range.

← Every figure for both machines, side by side, with sources