Deutz-Fahr Agrofarm 100 or Massey Ferguson MF 5430 A?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the Agrofarm 100 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 5430 A has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Deutz-Fahr Agrofarm 100 suits loader and hydraulic implement work better on this data: 12% (500 kg / 1,102 lb) more three-point lift.
  • The Massey Ferguson MF 5430 A suits road haulage better on this data: 18% (1,300 kg / 2,866 lb) more maximum permissible mass.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Deutz-Fahr Agrofarm 100 and Massey Ferguson MF 5430 A, with the call on each
QuestionAgrofarm 100MF 5430 ACall
Which puts more power through the PTO shaft?66.2 kW (88.8 hp)Traktorenlexikon, “Deutz-Fahr Agrofarm 100”66.2 kW (88.8 hp)Traktorenlexikon, “Massey Ferguson MF 5430”Not comparableNot comparable on power at the PTO shaft: the Agrofarm 100 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 5430 A has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the Agrofarm 100 and the MF 5430 A.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the Agrofarm 100 and the MF 5430 A.
Which pumps more oil for implements?55.5 L/min (14.7 gpm)Traktorenlexikon, “Deutz-Fahr Agrofarm 100”No figureNo call on hydraulic flow: no figure on record for the MF 5430 A.
Which lifts more on the three-point hitch?4,800 kg (10,582 lb)Traktorenlexikon, “Deutz-Fahr Agrofarm 100”4,300 kg (9,480 lb)Traktorenlexikon, “Massey Ferguson MF 5430”AheadThe Deutz-Fahr Agrofarm 100 has 12% more lift (500 kg / 1,102 lb) than the Massey Ferguson MF 5430 A (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?4,300 kg (9,480 lb)Traktorenlexikon, “Deutz-Fahr Agrofarm 100”3,800 kg (8,378 lb)Traktorenlexikon, “Massey Ferguson MF 5430”Ahead (a fact, not an advantage)The Deutz-Fahr Agrofarm 100 is 13% heavier (500 kg / 1,102 lb) than the Massey Ferguson MF 5430 A (both unladen weight, as stated by the source).
Which may carry more ballast and load?7,200 kg (15,873 lb)Traktorenlexikon, “Deutz-Fahr Agrofarm 100”8,500 kg (18,739 lb)Traktorenlexikon, “Massey Ferguson MF 5430”AheadThe Massey Ferguson MF 5430 A has 18% higher maximum permissible mass (1,300 kg / 2,866 lb) than the Deutz-Fahr Agrofarm 100 (both maximum permissible mass, as stated by the source).
Which has the wider choice of gears?20Traktorenlexikon, “Deutz-Fahr Agrofarm 100”16Traktorenlexikon, “Massey Ferguson MF 5430”EvenEven on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the Agrofarm 100 and the MF 5430 A.
Which is faster on the road?40 km/h (24.9 mph)Traktorenlexikon, “Deutz-Fahr Agrofarm 100”40 km/h (24.9 mph)Traktorenlexikon, “Massey Ferguson MF 5430”EvenEven on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
Which offers more PTO speeds?540 rpm / 1000 rpmTraktorenlexikon, “Deutz-Fahr Agrofarm 100”540 rpm / 1000 rpmTraktorenlexikon, “Massey Ferguson MF 5430”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Deutz-Fahr Agrofarm 100”No figureNo call on PTO independence: not stated for the MF 5430 A.
Which drives on both axles?4WDTraktorenlexikon, “Deutz-Fahr Agrofarm 100”4WDTraktorenlexikon, “Massey Ferguson MF 5430”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?2007–20082011–2013EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Deutz-Fahr Agrofarm 100 has 12% more lift (500 kg / 1,102 lb) than the Massey Ferguson MF 5430 A (both lift at the hitch ends, as stated by the source).
  • The Deutz-Fahr Agrofarm 100 is 13% heavier (500 kg / 1,102 lb) than the Massey Ferguson MF 5430 A (both unladen weight, as stated by the source).
  • The Massey Ferguson MF 5430 A has 18% higher maximum permissible mass (1,300 kg / 2,866 lb) than the Deutz-Fahr Agrofarm 100 (both maximum permissible mass, as stated by the source).
  • Even on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
  • Even on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on power at the PTO shaft: the Agrofarm 100 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 5430 A has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources