Deutz-Fahr AgroCompact 3.90 F/S vs VALMET 6200-4

12 material differences

Tractor one

1992–1996

No measured PTO figure

Tractor two

1996–2007

No measured PTO figure

Which should you choose?

Read our verdict on the AgroCompact 3.90 F/S and the 6200-4 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 3 fields identical or within 5%, which is not counted as material

Deutz-Fahr AgroCompact 3.90 F/S and VALMET 6200-4, field by field
Field	AgroCompact 3.90 F/S	6200-4	Gap
Engine
Engine power, claimed claimed	74.0 hp	74.0 hp	—
Engine declared	KHD F4L 913	VALMET 420 DSRE (44 DT)	differs
Displacement declared	4.09 L	4.40 L	+8% 6200-4
Maximum torque declared	184 lb·ft · 250 N·m	—	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Hydraulics & hitch
Pump flow declared	10.8 gpm · 41.0 L/min	21.2 gpm · 80.3 L/min	+96% 6200-4
Three-point lift at ends declared	4,850 lb · 2,200 kg	9,601 lb · 4,355 kg	+98% 6200-4
Rear PTO speeds declared	540 rpm / 1000 rpm	540 rpm / 1000 rpm	—
Weight & dimensions
Unladen weight declared	4,960–5,622 lb · 2,250–2,550 kg	8,929–9,193 lb · 4,050–4,170 kg	differs
Maximum permissible mass declared	8,818 lb · 4,000 kg	14,330 lb · 6,500 kg	+63% 6200-4
Wheelbase declared	80.5 in · 2,045 mm	91.6 in · 2,327 mm	+14% 6200-4
Length declared	136.6 in · 3,470 mm	177.7 in · 4,514 mm	+30% 6200-4
Width declared	47.2 in · 1,200 mm	85.9 in · 2,181 mm	+82% 6200-4
Height declared	82.7 in · 2,100 mm	106.3 in · 2,700 mm	+29% 6200-4
Ground clearance declared	13.0 in · 330 mm	16.9 in · 430 mm	+30% 6200-4
Turning radius, braked declared	—	15.3 ft · 4.65 m	—
Fuel tank declared	58.1 qt · 55 L	167.0 qt · 158.0 L	+187% 6200-4

Source

Source