DEUTZ-ALLIS 6080 vs Deutz-Fahr Agroplus 85
6 material differences · fewer than 12
Which should you choose?
Read our verdict on the 6080 and the Agroplus 85 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
6 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | 6080 | Agroplus 85 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 82.9 hp | 82.9 hp | — |
| Engine declared | ALLIS-CHALMERS 433 TI | — | — |
| Displacement declared | 3.29 L | — | — |
| Maximum torque declared | — | 250 lb·ft · 339 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 24.9 mph · 40 km/h | +33% Agroplus 85 |
| Hydraulics & hitch | |||
| Hydraulic centre declared | — | Open centre | — |
| Pump flow declared | 19.0 gpm · 71.9 L/min | — | — |
| Three-point lift at ends declared | — | 10,803 lb · 4,900 kg | — |
| Rear PTO speeds declared | 540/1000 rpm | 540 rpm / 1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 6,100 lb · 2,767 kg | 8,378 lb · 3,800 kg | +37% Agroplus 85 |
| Maximum permissible mass declared | — | 13,669 lb · 6,200 kg | — |
| Wheelbase declared | 96.0 in · 2,438 mm | 92.1 in · 2,340 mm | — |
| Length declared | 149.8 in · 3,805 mm | 146.2 in · 3,714 mm | — |
| Width declared | 73.1 in · 1,857 mm | 81.1 in · 2,060 mm | +11% Agroplus 85 |
| Height declared | 103.2 in · 2,621 mm | 103.3 in · 2,624 mm | — |
| Ground clearance declared | 21.1 in · 536 mm | 18.6 in · 472 mm | +14% 6080 |
| Turning radius, braked declared | 11.9 ft · 3.63 m | — | — |
| Fuel tank declared | 127.9 qt · 121.0 L | 147.9 qt · 140 L | +16% Agroplus 85 |
DEUTZ-ALLIS 6080 sources
Source
- Source: Traktorenlexikon, “Deutz-Allis 6080”
Deutz-Fahr Agroplus 85 sources
Source
- Source: Traktorenlexikon, “Deutz-Fahr Agroplus 85”