Daimler-Benz MB trac 65/70 vs Fiat 650 (DT)

7 material differences · fewer than 12

Tractor one

1973–1975

No measured PTO figure

Tractor two

1971–1976

No measured PTO figure

Which should you choose?

Read our verdict on the MB trac 65/70 and the 650 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

7 material differences · 7 fields identical or within 5%, which is not counted as material

Daimler-Benz MB trac 65/70 and Fiat 650 (DT), field by field
Field	MB trac 65/70	650 (DT)	Gap
Engine
Engine power, claimed claimed	64 hp	64.1 hp	—
Engine declared	Daimler-Benz OM 314 (314.956)	O.M.-FIAT CN 3	differs
Displacement declared	3.78 L	3.71 L	—
Maximum torque declared	159 lb·ft · 216 N·m	177 lb·ft · 240 N·m	+11% 650 (DT)
Transmission
Top speed declared	15.5 mph · 25 km/h	14.9 mph · 24 km/h	—
Clutch declared	—	Pedal operated two stage dry FEREDO double clutch	—
Hydraulics & hitch
Pump flow declared	10.6 gpm · 40 L/min	7.6 gpm · 28.8 L/min	+39% MB trac 65/70
Pressure declared	2,901 psi · 200 bar	2,843 psi · 196 bar	—
Three-point lift at ends declared	—	4,586 lb · 2,080 kg	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	7,297 lb · 3,310 kg	6,338 lb · 2,875 kg	+15% MB trac 65/70
Wheelbase declared	94.5 in · 2,400 mm	91.3 in · 2,320 mm	—
Length declared	165.4 in · 4,200 mm	148.4 in · 3,770 mm	+11% MB trac 65/70
Width declared	80.3 in · 2,040 mm	69.3 in · 1,760 mm	+16% MB trac 65/70
Height declared	104.3 in · 2,650 mm	68.5 in · 1,740 mm	+52% MB trac 65/70
Ground clearance declared	20.5 in · 520 mm	20.1 in · 510 mm	—
Turning radius, braked declared	—	11.6 ft · 3.53 m	—
Fuel tank declared	—	85.6 qt · 81.0 L	—

Source

Source