Case-Steyr M 968 (a) vs Deutz-Fahr Agroplus 67

10 material differences · fewer than 12

Tractor one

1994–2004

No measured PTO figure

Tractor two

2006–2009

No measured PTO figure

Which should you choose?

Read our verdict on the M 968 (a) and the Agroplus 67 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 3 fields identical or within 5%, which is not counted as material

Case-Steyr M 968 (a) and Deutz-Fahr Agroplus 67, field by field
Field	M 968 (a)	Agroplus 67	Gap
Engine
Engine power, claimed claimed	67 hp	66.1 hp	—
Engine declared	MWM 301.89 T	SLH 1.000.3 WT	differs
Displacement declared	—	3.00 L	—
Maximum torque declared	—	192 lb·ft · 260 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	24.9 mph · 40 km/h	differs
Clutch declared	Dry double clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Pump flow declared	10.9 gpm · 41.4 L/min	14.3 gpm · 54.0 L/min	+30% Agroplus 67
Three-point lift at ends declared	5,754 lb · 2,610 kg	6,614 lb · 3,000 kg	+15% Agroplus 67
Rear PTO speeds declared	540 rpm / 1000 rpm	540 rpm / 1000 rpm	—
Weight & dimensions
Unladen weight declared	6,217 lb · 2,820 kg	5,732 lb · 2,600 kg	+8% M 968 (a)
Maximum permissible mass declared	9,259 lb · 4,200 kg	9,921 lb · 4,500 kg	+7% Agroplus 67
Wheelbase declared	87.0 in · 2,209 mm	82.9 in · 2,105 mm	—
Length declared	145.7 in · 3,700 mm	135.0 in · 3,430 mm	+8% M 968 (a)
Width declared	74.8 in · 1,900 mm	82.7 in · 2,100 mm	+11% Agroplus 67
Height declared	92.3 in · 2,345 mm	—	—
Ground clearance declared	15.7 in · 400 mm	16.7 in · 425 mm	+6% Agroplus 67
Fuel tank declared	87.7 qt · 83.0 L	95.1 qt · 90 L	+8% Agroplus 67

Source

Source