Case-IH CS-78 (A) vs Deutz-Fahr Agroplus 80

10 material differences · fewer than 12

Tractor one

1995–2003

No measured PTO figure

Tractor two

2001–2005

No measured PTO figure

Which should you choose?

Read our verdict on the CS-78 (A) and the Agroplus 80 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 4 fields identical or within 5%, which is not counted as material

Case-IH CS-78 (A) and Deutz-Fahr Agroplus 80, field by field
Field	CS-78 (A)	Agroplus 80	Gap
Engine
Engine power, claimed claimed	77.0 hp	76.0 hp	—
Engine declared	MWM WD 401.81	KHD F4L 913 or F4L 914	differs
Maximum torque declared	—	204 lb·ft · 276 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	24.9 mph · 40 km/h	differs
Clutch declared	Dry Fichtel & Sachs double clutch	Mechanically-operated dry Borg & Beck single clutch, type: 305	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	Open centre	—
Pump flow declared	13.3 gpm · 50.5 L/min	12.7 gpm · 48.0 L/min	—
Pressure declared	—	2,031 psi · 140 bar	—
Rear PTO speeds declared	390/540/1000 rpm	540 rpm / 1000 rpm	differs
Weight & dimensions
Unladen weight declared	7,430 lb · 3,370 kg	6,063 lb · 2,750 kg	+23% CS-78 (A)
Maximum permissible mass declared	14,330 lb · 6,500 kg	9,921 lb · 4,500 kg	+44% CS-78 (A)
Wheelbase declared	95.3 in · 2,420 mm	88.0 in · 2,235 mm	+8% CS-78 (A)
Length declared	158.5 in · 4,025 mm	159.8 in · 4,060 mm	—
Width declared	73.7 in · 1,873 mm	79.1 in · 2,008 mm	+7% Agroplus 80
Height declared	104.7 in · 2,660 mm	96.7 in · 2,455 mm	+8% CS-78 (A)
Ground clearance declared	—	17.5 in · 445 mm	—
Fuel tank declared	105.7 qt · 100.0 L	95.1 qt · 90 L	+11% CS-78 (A)

Source

Source