Case-IH CS-78 (A) vs Deutz-Fahr Agrolux 80

9 material differences · fewer than 12

Tractor one

1995–2003

No measured PTO figure

Tractor two

2000–2005

No measured PTO figure

Which should you choose?

Read our verdict on the CS-78 (A) and the Agrolux 80 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 5 fields identical or within 5%, which is not counted as material

Case-IH CS-78 (A) and Deutz-Fahr Agrolux 80, field by field
Field	CS-78 (A)	Agrolux 80	Gap
Engine
Engine power, claimed claimed	77.0 hp	76.0 hp	—
Engine declared	MWM WD 401.81	KHD F4L 913	differs
Displacement declared	—	4.09 L	—
Maximum torque declared	—	199 lb·ft · 270 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Dry Fichtel & Sachs double clutch	Mechanically operated, dry Borg & Beck single clutch, type: 330	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	Open centre	—
Pump flow declared	13.3 gpm · 50.5 L/min	9.5 gpm · 36.0 L/min	+40% CS-78 (A)
Pressure declared	—	2,176 psi · 150 bar	—
Three-point lift at ends declared	—	6,799 lb · 3,084 kg	—
Rear PTO speeds declared	390/540/1000 rpm	540 rpm / 1000 rpm	differs
Weight & dimensions
Unladen weight declared	7,430 lb · 3,370 kg	6,195 lb · 2,810 kg	+20% CS-78 (A)
Maximum permissible mass declared	14,330 lb · 6,500 kg	11,023 lb · 5,000 kg	+30% CS-78 (A)
Wheelbase declared	95.3 in · 2,420 mm	92.5 in · 2,350 mm	—
Length declared	158.5 in · 4,025 mm	151.4 in · 3,845 mm	—
Width declared	73.7 in · 1,873 mm	81.1 in · 2,060 mm	+10% Agrolux 80
Height declared	104.7 in · 2,660 mm	112.6 in · 2,860 mm	+8% Agrolux 80
Ground clearance declared	—	17.7 in · 450 mm	—
Fuel tank declared	105.7 qt · 100.0 L	79.3 qt · 75 L	+33% CS-78 (A)

Source

Source